Jump to content
Ultimaker Community of 3D Printing Experts

Print Window is not opening on Cura 13.09Prerelease


Recommended Posts

Posted · Print Window is not opening on Cura 13.09Prerelease

Hello,

I am trying to test Cura13.09 on Win7 (64 bit). I can create the GCode and Save it. But print window is not opening when I click on Print Button. Is this a known issue?

 

  • Link to post
    Share on other sites
    Posted · Print Window is not opening on Cura 13.09Prerelease

    Not known by me. Can you check the output.txt in the cura installation folder, just copy the whole contents and post it here. Should help in diagnosing the problem.

     

  • Link to post
    Share on other sites
    Posted · Print Window is not opening on Cura 13.09Prerelease

    same here,

    Also tried right click toolpath print via USB and no print dialog box either.

    Hope this is what you're after..

    Loading # from disk...

    Reading mesh from binary blob with 84012 vertexes

    Loaded from disk in 0.016s

    Analyzing and optimizing model...

    Face counts: 28004 -> 27871 99.5%

    Vertex counts: 84012 -> 13942 16.6%

    Optimize model 0.047s

    Slicing model...

    Sliced model in 0.297s

    Generating layer parts...

    Generated layer parts in 0.156s

    Generated inset in 1.187s

    Generated up/down skin in 2.172s

    Loading ## from disk...

    Reading mesh from binary blob with 39624 vertexes

    Reading mesh from binary blob with 44388 vertexes

    Loaded from disk in 0.000s

    Analyzing and optimizing model...

    Face counts: 13208 -> 13160 99.6%

    Vertex counts: 39624 -> 6582 16.6%

    Face counts: 14796 -> 14728 99.5%

    Vertex counts: 44388 -> 7368 16.6%

    Optimize model 0.046s

    Slicing model...

    Sliced model in 0.266s

    Generating layer parts...

    Loading ## from disk...

    Reading mesh from binary blob with 39624 vertexes

    Reading mesh from binary blob with 44388 vertexes

    Loaded from disk in 0.015s

    Analyzing and optimizing model...

    Face counts: 13208 -> 13160 99.6%

    Vertex counts: 39624 -> 6582 16.6%

    Face counts: 14796 -> 14728 99.5%

    Vertex counts: 44388 -> 7368 16.6%

    Optimize model 0.047s

    Slicing model...

    Sliced model in 0.266s

    Generating layer parts...

    Loading ## from disk...

    Reading mesh from binary blob with 39624 vertexes

    Reading mesh from binary blob with 44388 vertexes

    Loaded from disk in 0.000s

    Analyzing and optimizing model...

    Face counts: 13208 -> 13160 99.6%

    Vertex counts: 39624 -> 6582 16.6%

    Face counts: 14796 -> 14728 99.5%

    Vertex counts: 44388 -> 7368 16.6%

    Optimize model 0.047s

    Slicing model...

    Loading ## from disk...

    Reading mesh from binary blob with 39624 vertexes

    Reading mesh from binary blob with 44388 vertexes

    Loaded from disk in 0.015s

    Analyzing and optimizing model...

    Face counts: 13208 -> 13152 99.6%

    Vertex counts: 39624 -> 6578 16.6%

    Face counts: 14796 -> 14704 99.4%

    Vertex counts: 44388 -> 7356 16.6%

    Optimize model 0.047s

    Slicing model...

    (<type 'exceptions.IOError'>, IOError(13, 'Permission denied'), <traceback object at 0x04D8FDC8>)

    >>Traceback (most recent call last):

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 162, in _run_module_as_main

    >> "__main__", fname, loader, pkg_name)

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 72, in _run_code

    >> exec code in run_globals

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 71, in <module>

    >> main()

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 41, in main

    >> printWindow.startPrintInterface(options.printfile)

    >> File "Cura\gui\printWindow.py", line 95, in startPrintInterface

    >> printWindowHandle = printWindow()

    >> File "Cura\gui\printWindow.py", line 204, in __init__

    >> self.temperatureHeatUp = wx.Button(self.temperaturePanel, -1, int(profile.getProfileSettingFloat('print_temperature')) + 'C')

    >>TypeError: unsupported operand type(s) for +: 'int' and 'str'

    >>Traceback (most recent call last):

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 162, in _run_module_as_main

    >> "__main__", fname, loader, pkg_name)

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 72, in _run_code

    >> exec code in run_globals

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 71, in <module>

    >> main()

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 41, in main

    >> printWindow.startPrintInterface(options.printfile)

    >> File "Cura\gui\printWindow.py", line 95, in startPrintInterface

    >> printWindowHandle = printWindow()

    >> File "Cura\gui\printWindow.py", line 204, in __init__

    >> self.temperatureHeatUp = wx.Button(self.temperaturePanel, -1, int(profile.getProfileSettingFloat('print_temperature')) + 'C')

    >>TypeError: unsupported operand type(s) for +: 'int' and 'str'

    Loading ## from disk...

    Reading mesh from binary blob with 39624 vertexes

    Reading mesh from binary blob with 44388 vertexes

    Loaded from disk in 0.016s

    Analyzing and optimizing model...

    Face counts: 13208 -> 13156 99.6%

    Vertex counts: 39624 -> 6580 16.6%

    Face counts: 14796 -> 14724 99.5%

    Vertex counts: 44388 -> 7366 16.6%

    Optimize model 0.046s

    Slicing model...

    Sliced model in 0.188s

    Generating layer parts...

    Generated layer parts in 1.109s

    Generated inset in 1.547s

    Generated up/down skin in 1.610s

    Loading # from disk...

    Reading mesh from binary blob with 84012 vertexes

    Loaded from disk in 0.000s

    Analyzing and optimizing model...

    Face counts: 28004 -> 27871 99.5%

    Vertex counts: 84012 -> 13942 16.6%

    Optimize model 0.047s

    Slicing model...

    Sliced model in 0.297s

    Generating layer parts...

    Generated layer parts in 0.156s

    Generated inset in 1.188s

    Generated up/down skin in 2.172s

    Loading ## from disk...

    Reading mesh from binary blob with 39624 vertexes

    Reading mesh from binary blob with 44388 vertexes

    Loaded from disk in 0.016s

    Analyzing and optimizing model...

    Face counts: 13208 -> 13160 99.6%

    Vertex counts: 39624 -> 6582 16.6%

    Face counts: 14796 -> 14728 99.5%

    Vertex counts: 44388 -> 7368 16.6%

    Optimize model 0.046s

    Slicing model...

    Sliced model in 0.266s

    Generating layer parts...

    Loading ## from disk...

    Reading mesh from binary blob with 39624 vertexes

    Reading mesh from binary blob with 44388 vertexes

    Loaded from disk in 0.000s

    Analyzing and optimizing model...

    Face counts: 13208 -> 13160 99.6%

    Vertex counts: 39624 -> 6582 16.6%

    Face counts: 14796 -> 14728 99.5%

    Vertex counts: 44388 -> 7368 16.6%

    Optimize model 0.046s

    Slicing model...

    Sliced model in 0.266s

    Generating layer parts...

    Loading ## from disk...

    Reading mesh from binary blob with 39624 vertexes

    Reading mesh from binary blob with 44388 vertexes

    Loaded from disk in 0.015s

    Analyzing and optimizing model...

    Face counts: 13208 -> 13160 99.6%

    Vertex counts: 39624 -> 6582 16.6%

    Face counts: 14796 -> 14728 99.5%

    Vertex counts: 44388 -> 7368 16.6%

    Optimize model 0.047s

    Slicing model...

    Sliced model in 0.266s

    Generating layer parts...

    Traceback (most recent call last):

    File "Cura\gui\sceneView.py", line 645, in <lambda>

    self.Bind(wx.EVT_MENU, lambda e: self._deleteObject(self._focusObj), menu.Append(-1, _("Delete object")))

    File "Cura\gui\sceneView.py", line 525, in _deleteObject

    self._scene.remove(obj)

    File "Cura\util\objectScene.py", line 134, in remove

    self._objectList.remove(obj)

    ValueError: list.remove(x): x not in list

    Loading ## from disk...

    Reading mesh from binary blob with 39624 vertexes

    Reading mesh from binary blob with 44388 vertexes

    Loaded from disk in 0.015s

    Analyzing and optimizing model...

    Face counts: 13208 -> 13156 99.6%

    Vertex counts: 39624 -> 6580 16.6%

    Face counts: 14796 -> 14724 99.5%

    Vertex counts: 44388 -> 7366 16.6%

    Optimize model 0.047s

    Slicing model...

    Sliced model in 0.188s

    Generating layer parts...

    Generated layer parts in 1.140s

    Generated inset in 1.594s

    Generated up/down skin in 1.594s

    0

    0

    0

    0

    1

    1

    1

    1

    2

     

  • Link to post
    Share on other sites
    Posted · Print Window is not opening on Cura 13.09Prerelease

    # Generating comtypes.gen._683BF642_E9CA_4124_BE43_67065B2FA653_0_1_0

    # Generating comtypes.gen.TaskbarLib

    Loading # from disk...

    Reading mesh from binary blob with 563922 vertexes

    Loaded from disk in 0.234s

    Analyzing and optimizing model...

    Loading # from disk...

    Reading mesh from binary blob with 563922 vertexes

    Loaded from disk in 0.171s

    Analyzing and optimizing model...

    Face counts: 187974 -> 168466 89.6%

    Vertex counts: 563922 -> 84217 14.9%

    Optimize model 0.656s

    Slicing model...

    Sliced model in 0.967s

    Generating support map...

    Generating layer parts...

    Generated layer parts in 0.327s

    Generated inset in 1.810s

    Generated up/down skin in 2.543s

    Loading # from disk...

    Reading mesh from binary blob with 563922 vertexes

    Loaded from disk in 0.203s

    Analyzing and optimizing model...

    Face counts: 187974 -> 168466 89.6%

    Vertex counts: 563922 -> 84217 14.9%

    Optimize model 0.920s

    Slicing model...

    Sliced model in 1.108s

    Generating support map...

    Generating layer parts...

    Generated layer parts in 0.312s

    Generated inset in 2.043s

    Loading # from disk...

    Reading mesh from binary blob with 563922 vertexes

    Loaded from disk in 0.249s

    Analyzing and optimizing model...

    Face counts: 187974 -> 168466 89.6%

    Vertex counts: 563922 -> 84217 14.9%

    Optimize model 0.921s

    Slicing model...

    Sliced model in 1.045s

    Generating support map...

    Generating layer parts...

    Generated layer parts in 0.390s

    Generated inset in 1.497s

    >>Traceback (most recent call last):

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 162, in _run_module_as_main

    >> "__main__", fname, loader, pkg_name)

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 72, in _run_code

    >> exec code in run_globals

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 71, in <module>

    >> main()

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 41, in main

    >> printWindow.startPrintInterface(options.printfile)

    >> File "Cura\gui\printWindow.py", line 95, in startPrintInterface

    >> printWindowHandle = printWindow()

    >> File "Cura\gui\printWindow.py", line 204, in __init__

    >> self.temperatureHeatUp = wx.Button(self.temperaturePanel, -1, int(profile.getProfileSettingFloat('print_temperature')) + 'C')

    >>TypeError: unsupported operand type(s) for +: 'int' and 'str'

    >>10:39:50: Debug: ..\..\include\wx/msw/private.h(697): 'UnregisterClass' failed with error 0x00000584 (class still has open windows.).

    >>Traceback (most recent call last):

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 162, in _run_module_as_main

    >> "__main__", fname, loader, pkg_name)

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 72, in _run_code

    >> exec code in run_globals

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 71, in <module>

    >> main()

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 41, in main

    >> printWindow.startPrintInterface(options.printfile)

    >> File "Cura\gui\printWindow.py", line 95, in startPrintInterface

    >> printWindowHandle = printWindow()

    >> File "Cura\gui\printWindow.py", line 204, in __init__

    >> self.temperatureHeatUp = wx.Button(self.temperaturePanel, -1, int(profile.getProfileSettingFloat('print_temperature')) + 'C')

    >>TypeError: unsupported operand type(s) for +: 'int' and 'str'

    >>10:40:08: Debug: ..\..\include\wx/msw/private.h(697): 'UnregisterClass' failed with error 0x00000584 (class still has open windows.).

    >>Traceback (most recent call last):

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 162, in _run_module_as_main

    >> "__main__", fname, loader, pkg_name)

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\python\lib\runpy.py", line 72, in _run_code

    >> exec code in run_globals

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 71, in <module>

    >> main()

    >> File "C:\Program Files (x86)\Cura_13.09-PreRelease\Cura\cura.py", line 41, in main

    >> printWindow.startPrintInterface(

     

  • Link to post
    Share on other sites
    Posted · Print Window is not opening on Cura 13.09Prerelease

    Ah, ok, yes, that one is fixed in the 13.10 multi-language version. (Which has a bug causing it to default to system language when you select english)

    I've uploaded a 13.10-RC1, this should fix the bug. This RC does not allow language selection as we do not find the translations up the quality needed for a release.

     

  • Link to post
    Share on other sites
    Posted · Print Window is not opening on Cura 13.09Prerelease

    Bonjour, est il possible d'avoir cura en français?

    Merçi

     

  • Link to post
    Share on other sites
    Posted · Print Window is not opening on Cura 13.09Prerelease

    Bonjour, est il possible d'avoir cura en français?

    Merçi

     

    Oui, mais pas pour la prochaine version. Les gens ont contribué d'une traduction française, mais il a besoin de contrôle de qualité. J'ai aussi des traductions allemand, néerlandais, espagnol et polonais.

    (If you are talking French, you can expect google-translated replies, if you are lucky)

    I will make a new multi-language beta for people to review the translations.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...