[Solved] spiderweb-like strings nylon with no movement between parts

I printed a simple open container with nylon. Walls are 1.6mm thick (.4 nozzle, 4 walls--no infill), so the nozzle never moves over open space--the usual culprit for stringing. I'm wondering what might be causing this. I'm attaching the Cura project as well. This was printed on a UM3 with Ultimaker Nylon. In further processing it, I noticed that there was a fair amount of "hair" on the outside as well. Also, the first time I printed this model, the same kind of webbing ap

This was one of two issues (or a combination of both). My nylon may have gotten a little damp. I store it in a drybox, but haven’t yet built one I can print from. RElative humidity in the house sits around 50%. So I dried the filament overnight sitting on the build plate at 90c with a towel over it. I used the towel to pick up the roll and put it directly to the drybox to cool. i also realized that we had some warm days that caused the AC to kick on. There is a vent in th