Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · material not feeding

Please help. I have a UM3+ and it has worked great for the past 2 years. Suddenly the PVA in printcore 2 is not extruding. Stopped working mid-print. I have 1) cleaned AND changed the print head 2) cleaned the feeder gears - even took the whole feeder assembly apart, cleaned it out and put it back together and 3) blew out the bowden tube with air. I am at my wit's end. I have searched all over the web and there are no possible solutions or even suggestions on how to re-assemble the feeder. I have a math camp starting next week and desperately need this to work.

 

Thanks!

Toni

  • Share this post


    Link to post
    Share on other sites
    Posted · material not feeding

    Does your PVA feel at all flexible? How long has this PVA been open? If you put your AA Print Core in Slot 2 and try to print PLA is it having the same issues you're having with the PVA?

    When reassembling the feeder, have you set the tension to the mid-point? 

  • Share this post


    Link to post
    Share on other sites
    Posted · material not feeding

    I put the PLA in and changed the print core and it printed like a charm. So I am guessing the the PVA got too old and damp. Is the lesson to print what I need with PVA then take it off and store it? Thank you thank you thank you for your help. I was thinking the printer was ruined.

  • Share this post


    Link to post
    Share on other sites
    Posted · material not feeding

    Glad to help! Definitely sounds like the PVA is too damp. When you're not using it, store it in a sealed plastic bag or box with silica. You can try drying it out on the heated bed for a few hours at 55 or 60 C, but if it's too far gone, it may not be recoverable. If it gets too dried out trying to recover it, it can get brittle and snap in the bowden tube.

  • Share this post


    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Talking additive | The 3D printing podcast
        Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
          • Like
        • 3 replies
      • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
        Save your seat for either broadcast on September 23.
        What will you learn?
        · Best practices for iterative print preparation and every lesson you should learn from each print
        · The right way to use per-object settings and when they are most useful
        · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
        · How to optimize print profile settings and whether to “keep” or “discard” changes
        · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
        · And a whole lot more tips and tricks!
         
        How can I join?
        This free masterclass will take place twice:
        1. 11am CEST (5pm SGT, 5am EDT)
        2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
          • Like
        • 0 replies
      • Do you use 3D printing at work? Let us know
        It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
        • 1 reply
    ×
    ×
    • Create New...