Jump to content
Ultimaker Community of 3D Printing Experts

Is it possible to get a whole first layer


handsome1987
 Share

Recommended Posts

Posted · Is it possible to get a whole first layer

I hope someone can tell me if this is possible:

In the attachments you will find 2 screenhots one from cura and one from simplify3d.
As you can see with cura the first layer of the print is cut in pieces where on simplify3d the first layer is a whole solid layer.
Can anyone tell me if this is also possible with cura?

simplify3d.png

cura.png

  • Link to post
    Share on other sites

    Posted · Is it possible to get a whole first layer

    The bottom of your model isn't all at the same level.  You have a few options.  Usually when this happens to me I go with the simplest option.  I go to menu item "preferences" "configure cura" then uncheck "automatically drop models to the build plate" then click on the model in cura so it is selected and on the left side of the screen select the icon to "move" the part then set the z value to a negative value.  This will chop off a bit of the bottom of the part.  You might only have to chop off 0.1mm. (set Z to -0.1) but typically I have to cut off at least 1mm.  Depending on the model.

     

    I suspect the reason the results are different in S3D is probably that your bottom layer height in cura is 0.27mm and 0.3mm in S3D.  If this is true then you can go with method 2 which is to increase bottom layer height until it includes enough of the model

     

    A third option is to fix the model so that everything that you want to start on the first layer... starts on the first layer.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...