Jump to content
Ultimaker Community of 3D Printing Experts

Just curious: auto-levelling

Recommended Posts

Posted · Just curious: auto-levelling

I only occasionally read through posts on the board here and saw a big discussion on auto-levelling which made my curious on what auto-levelling actually does.


Does auto-levelling actually adjust any setting/layer height or print condition or is it only a safety check to see if the build plate isn't complete mounted sideways?


Just curious to know the inner workings,..

  • Link to post
    Share on other sites
    Posted · Just curious: auto-levelling

    To my understanding there are a couple kinds of auto leveling. They both allow the printer to adjust the z-axis dynamically to maintain an accurate layer height for the first layer. After that, I think they gradually adjust so the layers are level to the xy plane of head movement.


    They do this by measuring the actual height of certain points on the bed. Simplest is a 3-point sampling like is used on the UM3. Three points define the plane of the bed in 3-space...assuming the bed is actually flat. Others (I think the UM S5 does this) sample multiple points in a grid pattern. This defines a mesh that can model curvature of the plate that might occur, for example, from uneven heating.


    Of course, the better the mechanical leveling and the flatter the plate, the less needs to be corrected by the algorithms.

  • Link to post
    Share on other sites
    Posted · Just curious: auto-levelling

    Hi Johnse,


    Thank you for the answer, I assumed a similar thing that it does some Z-axis adjustment, but what specifically wonders me how it would deal with the 3 point measurement. 


    On my UM3 you do the manual levelling mid point, right front, left front and the dual nozzle midpoint by adjusting the screws underneath. This should put the build plate level.


    Assuming I messed this up and right forward is way too low. How would my UM3 auto-levelling deal with that? It cannot adjust the right forward screw to make the plate level, so the only thing it can do is figure out mid point is 0, right forward is too low and left forward is at 0 too. Would it then constantly adjust the Z-axis during printing while the printhead moves from right forward towards left behind? It would have to be otherwise taking all those measurements doesn't make sense. If it only adjusts the initial layer height, taking a measurement mid-point would have been sufficient. 


    Which is why I'm thinking the auto-levelling sequence is just a double check if you have levelled the bed not completely tilted and bails out of the print if you have and otherwise starts because it's 'within acceptable bounds'.


    Anyway, maybe one of the UM people can give some insight is what it does or try to figure out during that process.









  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • 24 Visiting our virtual showroom

      1. 1. Have you visited our virtual showroom before?

        • Yes
        • No
      2. 2. If yes - what content did you find most interesting?

        • Information about Ultimaker ecosystem
        • Applications & application stories
        • Customer success stories
        • Webinar sessions
        • Material wall & ecosystem partners
        • New product introduction; software subscription plans
      3. 3. What of the below would make you consider visiting (again)?

        • New Live Ultimaker Webinar streams
        • ‘Ask Me Anything’ with industry experts or Ultimaker staff via main stage and public chat
        • New customer success stories
        • New applications
        • Presentations/news from ecosystem partners
        • Opportunity to meet representatives for an interactive tour
        • Helpful videos like Software tutorials
        • Other; leave input in a comment below!

    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    • Create New...