Jump to content
sdfasdafasdfasdfasdfasdf

Ultimaker 4.2.1 won´t print a certain .stl anymore

Recommended Posts

Posted · Ultimaker 4.2.1 won´t print a certain .stl anymore

Hi, 
I updated to Ultimaker 4.2.1 and now a model that I created in 2018 and I am printing every few weeks isn´t printing anymore. 
When slicing, it just prints a Tower and useless support structures : 

-> this is the model x2 before preparation : 
image.thumb.png.7d2111ebd027f4fa0541d1a782b7e0ee.png

 

and this is the simulated print : 

 

-> the Model is completely ignored and there are just useless support structures printed 

image.thumb.png.d898ab88fb344f05de62fca90a08f99e.png

 

what could be the reason ?! 

 

I exported it again as .stl from the model, but nothing changes this situation.

I can print every other model without problem, but it´s just this specific model since Update to 4.2.1 .... 

 

Could it be a Bug in the 4.2.1 - Version ? 

 

It´s definitely not the model, it has been printed a thousand times before flawless..... 

 

04_RadsensorPanel_Raw_trianguliert_V4_final.stl

Share this post


Link to post
Share on other sites
Posted · Ultimaker 4.2.1 won´t print a certain .stl anymore

I've found it, it's the slicing tolerance.....
When I set it to "Exclusive" the Model won't be printed, every other setting will slice it as intended. 


Any explanation on this ?! 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!