Jump to content
Sign in to follow this  
jason-hk

sequential object printing - my fan is going hit any thing?

Recommended Posts

Posted · sequential object printing - my fan is going hit any thing?

Hello,

I have just updated to latest Mac version of Cura and found when printing multiple objects, they are printed from right to left sequentially instead of printing them together in a summarised layer. (the print head will finish one first, and then move the next one, z axis lower to the bottom layer of next object again)

As the objects i am printing are flat, my fan duct on the right side of my nozzle did not hit the finished objects when it is printing. I am just wondering if my objects is higher than my fan, what will happen, will it hit something? I am not expecting Cura tell the print head to avoid hitting finished objects.

Should I change my fan to the left side of my nozzle? what if someone have two fans on both side?

Regards,

Jason

 

Share this post


Link to post
Share on other sites
Posted · sequential object printing - my fan is going hit any thing?

Go to file "machine settings..." and adjust the numbers there. hopefully that will get Cura to print in the other direction. I don't know if Daid implemented it in Cura but it should print starting towards the side with the largest clearance number first.

If you want to force each part to print all at the same time then set the gantry height to zero.

 

Share this post


Link to post
Share on other sites
Posted · sequential object printing - my fan is going hit any thing?

The fan is usually on the left side, not on the right (as by the assembly instructions), you can adjust the head size in the machine settings to change this. (swap the Xmin/Xmax head size settings)

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 181 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!