Jump to content
Ultimaker Community of 3D Printing Experts

bridging not making best use of exisiting walls


td1
 Share

Recommended Posts

Posted · bridging not making best use of exisiting walls

Cura 4.2.1

It strikes me that the optimal path for bridges ought to be horizontal because a) shorter distance, and b) start and end on existing walls with solid foundations.

Please see layer 41 towards the end when bridging starts, we have long diagonals ending on a very weak line at the top of Y, and naturally the whole layer droops at the top of Y.

 

Would be handy if someone could recommend improved settings, else is this worthy of a software bug/feature report ?

 

Thank you in advance

Tim

X_carriage_-_modified_MK3_fan_blower.stl modified_MK3_fan_blower.3mf

  • Link to post
    Share on other sites

    Posted · bridging not making best use of exisiting walls

    Thanks for the project file. The remedy is easy, just enable the bridge settings in the experimental section and the first bridge layer becomes like this...

     

    Screenshot_2019-09-21_22-41-28.thumb.png.0ffe248ac4a59bef0f3b1491cf523627.png

     

    You will find there's a bunch of settings in there for tweaking the bridging behaviour.

     

  • Link to post
    Share on other sites

    Posted · bridging not making best use of exisiting walls

    Wowzers! That's a scary long and bunch of detailed settings right there! Thank you @burtoogle I guess because it's in Experimental the issue I reported has already been recongnised and will trickle down to default behaviour in a future release ?

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...