Jump to content
Ultimaker Community of 3D Printing Experts

Dual extruder head crashing


bman
 Share

Recommended Posts

Posted · Dual extruder head crashing

I have noticed a continuing problem with Cura with regards to third party dual extruder printers.

 

I f you use your printer without enabling the prime tower or ooze shield everything works fine, i.e. no crashes.

 

If you enable the prime tower or ooze shield, and don't look at the prime tower location, it could be defaulted off the print bed. This results in a crash.

 

Cura does not earn you that the tower is out of bounds and slices the print without warnings. This happens with either the prime tower or ooze shield enabled.

 

If you expose the prime tower location it is red, signifying and error, but only if it's visible.

 

Cura should warn users and prevent slicing if the print head goes to the beyond the safe travel area as setup in the machine settings. This way user's know there is a problem and what is the cause.

 

Thank you

Bernie

 

  • Link to post
    Share on other sites

    Posted · Dual extruder head crashing

    I am not an expert for the printer definition files, but I guess there are the "not allowed" areas defined and also a default location for the prime tower. When you just add a custom printer in Cura you will miss some features of the definition files. Take a look on Github, there is a wiki with some deeper information about the printer definition files and then check the included ones to get an idea how to create your own.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...