Jump to content

Script für Retract?


Filmpalast

Recommended Posts

Posted · Script für Retract?

Ich will eigentlich nicht den Moralapostel spielen, aber ich kann nicht anders. 

 

1 hour ago, Filmpalast said:

Naja, wenn dir die PostScripts für Temptower nicht bekannt sind...

Man könnte das auch freundlicher sagen, nicht jeder kann deinen Gedankengängen sofort folgen was du mit "schöne Scripts" meinst.

 

On 11/6/2019 at 10:36 AM, Filmpalast said:

gäbe es auch eines für den Retract?

In deiner Sprache würde ich jetzt sagen: Siehst du eines in bei den Postscripts?

 

Bitte nicht falsch verstehen, ich will dich lediglich darauf hinweisen, dass wir hier einen freundlichen und respektvollen Umgang pflegen. Das ist in anderen Foren nicht immer so, aber hier bitte schon. Danke für dein Verständnis!

 

Und um nun deine Frage zu beantworten:

Ich nehme an du möchtest ähnlich wie einen Temp Tower einen Tower drucken wo du unterschiedliche Retract Einstellungen testen kannst. Das gibt es in der Form nicht. Die einfachste Möglichkeit wäre, den Gcode nach dem Slicen zu editieren und mit Suchen/Ersetzen die einzelnen Werte beim Retract zu ändern. Ist zwar mühsam, aber eine andere Methode kenne ich nicht. Den Gcode solltest du dir nach der Mühe aber gut aufheben, denn du wirst es immer wieder brauchen wenn du unterschiedliche Materialien testen möchtest. 

  • Like 1
Link to post
Share on other sites

Posted · Script für Retract?

Hallo Smithy,

 

dem stimme ich ja zu, aber wenn eine Antwort kommt, ohne Höflichkeitsformen wie Hallo oder sonst und mit drei und zwei Mal ??

Dann ist das für mich keine höfliche Antwort und dem entsprechend reagiere ich. 

1 x 1

 

Alles klar, danke.

 

Grüße

  • Link to post
    Share on other sites

    Posted · Script für Retract?

    Hallo Filmpalast

    Die Grußformel sparen wir uns meistens, das stimmt, macht dafür die Beiträge oft lesbarer, aber kann man halten wir man möchte - ein Gruß kann nie schaden 🙂 Ansonsten ist es in Foren immer ganz gut wenn man ein bisschen toleranter ist. Das Problem, wenn man sein Gegenüber nicht sieht ist, dass man nicht weiß ob es so gemeint war wie man es aufgefasst hat. Meistens ist es nämlich so, dass der andere es gar nicht so gemeint hat und einfach im Stress war oder einen schlechten Tag hatte. Aber ich bin mir sicher du weiß eh was ich meine, will das Thema auch nicht ausschlachten - alles ist gut 🙂 

     

    Zurück zum Thema:

    Warum willst du unterschiedliche Retract Einstellungen testen, hast du Probleme mit den Default Settings (falls ja welches Material) oder einfach Interesse?

     

  • Link to post
    Share on other sites

    Posted · Script für Retract?

    Guten Morgen

     

    Ich verwende aktuell das ecoPLA von 3DJake und habe damit Stringing Probleme. 

    Der Test den ich machen möchte ist ohne großen Aufwand Speed und Retract (mm) zu testen um eine ev. fkt. Einstellung zu finden.

     

    BG

  • Link to post
    Share on other sites

    Posted · Script für Retract?

    Ich habe es selbst noch nie gemacht, aber ich denke so einfach wie ein Temp Tower wird das nicht werden, da beim Retract auch die Temperatur hineinspielt. Damit will ich sagen wenn du dir so einen Retract Tower bastelst, dann solltest du denn auch mit unterschiedlichen Temperaturen drucken, denn ich vermute da wird auch ein Unterschied im Stringing sein.

  • Link to post
    Share on other sites

    Posted · Script für Retract?

    Ja, leider immer sehr viele Variablen.

    BG

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...