Jump to content
Ultimaker Community of 3D Printing Experts

Cura 4.3 not scaling properly


Recommended Posts

Posted · Cura 4.3 not scaling properly

Hi

 

I have a model to scale, but not the same ratio between X / Z and Y.

X and Z should be scaled 99,6 % and Y 98,8 %.

 

So I have first rescale uniformly the model to 99,6 %.

82732924_Capturedcran2019-11-0916_43_42.thumb.png.70bc07766fba14456b1c5d42f3e7a3d9.png

 

Then unchecked the uniform scaling

157853060_Capturedcran2019-11-0916_43_53.thumb.png.4824f89b6c49073a783303136a45fc26.png

 

Then changed the Y ratio to 98,8 but not clicking

1856210072_Capturedcran2019-11-0916_44_08.thumb.png.28db80cddc53d609f1ca21a166b58610.png

 

Then after clicking, the result is 

 1450235273_Capturedcran2019-11-0916_44_25.thumb.png.3a530fdacf4aab7af45f749608c95178.png

 

Looks like the X and Y are not properly taken into account.

 

I've redone the following test, starting from a full scale model, unchecking the uniform scaling

Then setting the X to 90 % and press enter. Both X and Y ratio are changed to 90%

 

There is a new bug in 4.3....

 

 

 

  • Link to post
    Share on other sites
    Posted · Cura 4.3 not scaling properly
    28 minutes ago, peggyb said:

    did you rotate the model, something goes wrong (bug) if the model is rotated and scaled.

    Yes I did rotate the model 90° along the Z Axis in order to fit on the build plate.

     

    I haven't noticed the bug before, as it's pretty rare to have to rescale not uniformly a model before printing

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...