Jump to content

Cannot abort or pause print

Recommended Posts

Posted · Cannot abort or pause print



I'm using a Ultimaker 3 and has a print job running at the moment which I want to abort. 


Unfortunately as you can see in the attached picture there is no way to abort it.

I cannot access the printer at the moment to abort it directly.


Does anybody have a suggestion or any idea why it is?

It is a restarted print which was aborted once before.


Thanks in advance



Share this post

Link to post
Share on other sites
Posted · Cannot abort or pause print

When locking at the print preview/camera does that function as intended. Just wondering if it might be a connection problem


Is it the same if you use Cura connect?

Share this post

Link to post
Share on other sites
Posted · Cannot abort or pause print

Thanks for the reply.


This was for one print only, so far everything is working again.

I'm pretty sure it had something to do with the restarted print, but at the moment I don't have the time and patience to make a real test. 


2 hours ago, NBull said:

Is it the same if you use Cura connect?

 The picture I posted was in Cura connect, but in Cura it was also not working

I also tried to pause it within the API, but there i wasn't able to do it either. I think mainly due to the fact that my ID didn't give me authorized access (no idea why this happend).


So everything was pretty weird and I will test it when I have time to maybe figure out the problem.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 45 replies
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!