Jump to content
maht

Ultimaker Cura 4.4 released with new Intent profiles

Recommended Posts

Posted · Ultimaker Cura 4.4 released with new Intent profiles
4 hours ago, ahoeben said:

 

Hi @lela, could you open a new thread for this? I'm happy to help you, but it might involve some back-and-forth that will confuse this thread.

FYI,

 

You don't need to do anything. Just save the gcode file to your desktop or where ever. go to the octoprint screen and upload the file. Simple. No complicated procedures.

Image2.jpg

Image3.jpg

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

Yes I know.
But then I can't see the camera image that is larger in Cura than in Octoprint.
But thanks for the help ūüôā

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

Ive installed the the custom compiled Cura-MB-Master and Cura 4.4.1

both are failing to show older custom profiles, and it looks like it is still extremely slow 

Screenshot 2019-12-24 17.28.48.png

Screenshot 2019-12-24 17.29.59.png

Screenshot 2019-12-24 17.46.18.png

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

As far as profiles and all that jazz go, my mb-master builds are going to behave the same as the UM builds because I don't fiddle with that part of Cura. When you say extremely slow are you referring to the speed of Cura itself or the speed of the print? Can you provide a project file that illustrates the problem?

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles
2 hours ago, burtoogle said:

As far as profiles and all that jazz go, my mb-master builds are going to behave the same as the UM builds because I don't fiddle with that part of Cura. When you say extremely slow are you referring to the speed of Cura itself or the speed of the print? Can you provide a project file that illustrates the problem?

speed of the print you can see in the 3rd image with Cura 4.1, I can print that project in 3h 17m in Cura 4.4.1 it estimate to print the same project in 16h 37m, I already tested the estimation in Cura 4.2 and it was extremely slow printing, it looks like it was only made for Marlin, in case of Cura 4.1 it perfectly works with Marlin and Klipper

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

Hello @ramsesiden, that's understood. Could you please attach the gcode for that print sliced by Cura 4.1 and 4.4.1 so I can compare them and see what's causing the big slowdown. Thanks.

Share this post


Link to post
Share on other sites
Posted (edited) · Ultimaker Cura 4.4 released with new Intent profiles

Hello @burtoogle   it is not only for that print you can test with any print using Cura 4.1 vs Cura 4.4.1 , Octoprint and Klipper using a Klipper profile, I can send you both profiles for Klipper if you need, you can test it with any print and you will see the big difference

Edited by ramsesiden

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

I don't have Cura 4.1 installed so please provide the gcode for comparison. Any print that shows the slowdown will do.

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles
On 11/19/2019 at 10:55 AM, midacl said:

Just finished installing 4.4, and it crashes on startup. I've submitted the crash reports.

 

Windows 10 1809

Intel i7 5820k

16gb ram

Quadro K2200

I found that I need to run Cura 4.4 with As Administrator checked in the properties to keep it from crashing.

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles
On 12/25/2019 at 3:11 AM, burtoogle said:

I don't have Cura 4.1 installed so please provide the gcode for comparison. Any print that shows the slowdown will do.

Sorry for the delay, it was xmas and I was with my family merry xmas to all of you, here are the gcode files and images, in case of cura-mb-master and Cura 4.4.1 I'm using nozzle switch in 50 instead of 60 as it was in the orginal custom Klipper configuration Im using, other settings are the same. 

Cura 4.4.1.png

Cura 4.1.png

Cura-mb-master.png

TT_T800_Cura-mb-master latest version.gcode TT_T800_Cura4.1.gcode TT_T800_Cura4.4.1.gcode

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

Hello @ramsesiden, I notice that the gcode header in the 4.4.1 file contains this line:

 

M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate

 

Marlin expects the values to be in mm/s but most of the other printer firmwares (I believe) expect the values to be in mm/min.

 

I don't know how Klipper behaves in this respect but if it's like the majority of firmwares, it will end up using a very low speed limit.

 

As for the print time estimates, I cannot explain the big difference other than perhaps the print time estimate algorithm used in Cura got reworked between the 4.1 and 4.4 releases. That's possible.

  • Like 1

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

I posted this in the Ultimaker 3D Printers section, but the issue seems to have started when I installed Cura v4.4.0, so I'm posting a copy here as well.

 

 

Ever since Cura v4.4 was released with the new intent-based profiles, I have found that I'm having some dimensional accuracy issues when printing on the S5.
 
I used the Engineering Profile, which is supposed to provide the greatest dimensional accuracy, but the resulting parts do not fit like they should.
 
I have been printing e-NABLE hand devices with my S5 ever since I got it, and it has always worked great. But using Cura v4.4.0, I printed an e-NABLE hand, and none of the parts would fit together. I could not get the pins into the holes, even using a great deal of force.
 
I also recently printed a bunch of these USB Flash Drive Cryptex cases. The rings were much tighter than they should be and were difficult to rotate once installed.
 
Here's the thing... I did both of the above prints on the Ultimaker S3, using the same version of Cura, exact same settings, and the same material, and in both cases, the prints came out perfectly. The e-NABLE hand parts fit perfectly, and the rings on the cryptex holder moved easily and smoothly. So I'm not sure if the issue is related to Cura's print profiles for the Ultimake S5 or something with the S5 firmware.
 
I'm hoping it's something related to the Cura profile settings, as that would be an easy fix. I just installed Cura v4.4.1 but have not had time to test this again to see if it has changed.
 
Has anyone else encountered this issue with the latest version of Cura and the Ultimaker S5? Any suggestions?

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

I am using 4.4.1 and there seems to be a big in the brim on outside only feature. Even with it enabled the brim is being printed on the inside and outside of my model.

Share this post


Link to post
Share on other sites
Posted (edited) · Ultimaker Cura 4.4 released with new Intent profiles
On 12/23/2019 at 2:58 PM, PaxtonP4 said:

Just installed 4.4.1 but it still crashes on installation - same as 4.4.

 

I've sent the log file as requested.

 

regards

Just tried again as no one from CURA has provided any help. Still crashes:

 

 

 

 

441 crash.png

441 crash.png

Edited by PaxtonP4

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

Same problem here: just upgraded to 4.4.1 from 4.3.0 on prompting from Cura, to find it crashes at every startup, even when run as administrator. "Upgrade" removed old version - I said "yes" to remove all config files, so effectively a clean install. 

Win10 Home x64 18362.535 Version 1903. Core i7 4790 + 16GB

Anycubic I3 Mega but not cabled. 

 

one crash report submitted, have now fully uninstalled and reverted to 4.3, so no longer have any logs. Could recreate I guess. 

Let me know if you want any other information. 

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

Another one here where it crashes but it does it on 4.3 too. Doesnt seem I can run any modern versions.

Log file:

2020-01-03 11:57:08,011 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FileLogger
2020-01-03 11:57:08,118 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdateChecker
2020-01-03 11:57:08,166 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdater
2020-01-03 11:57:08,197 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzReader
2020-01-03 11:57:08,253 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzWriter
2020-01-03 11:57:08,293 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeProfileReader
2020-01-03 11:57:08,368 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeReader
2020-01-03 11:57:08,416 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeWriter
2020-01-03 11:57:08,506 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ImageReader
2020-01-03 11:57:08,548 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LegacyProfileReader
2020-01-03 11:57:08,577 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalContainerProvider
2020-01-03 11:57:08,644 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalFileOutputDevice
2020-01-03 11:57:08,693 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MachineSettingsAction
2020-01-03 11:57:08,740 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ModelChecker
2020-01-03 11:57:08,784 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MonitorStage
2020-01-03 11:57:08,848 - WARNING - [MainThread] UM.Preferences.getValue [97]: Tried to get the value of non-existing setting cura/active_mode.
2020-01-03 11:57:08,855 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PerObjectSettingsTool
2020-01-03 11:57:08,885 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PostProcessingPlugin
2020-01-03 11:57:08,928 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PrepareStage
2020-01-03 11:57:08,957 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PreviewStage
2020-01-03 11:57:09,049 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RemovableDriveOutputDevice
2020-01-03 11:57:09,125 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimulationView
2020-01-03 11:57:09,171 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SliceInfoPlugin
2020-01-03 11:57:09,217 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SolidView
2020-01-03 11:57:09,257 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SupportEraser
2020-01-03 11:57:09,356 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [116]: No auth data to retrieve the access_token from
2020-01-03 11:57:09,363 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin Toolbox
2020-01-03 11:57:09,397 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin CameraTool
2020-01-03 11:57:09,467 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MirrorTool
2020-01-03 11:57:09,517 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RotateTool
2020-01-03 11:57:09,572 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ScaleTool
2020-01-03 11:57:09,615 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SelectionTool
2020-01-03 11:57:09,662 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TranslateTool
2020-01-03 11:57:09,720 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TrimeshReader
2020-01-03 11:57:09,808 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPReader
2020-01-03 11:57:09,859 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPWriter
2020-01-03 11:57:09,984 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UltimakerMachineActions
2020-01-03 11:57:10,666 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UM3NetworkPrinting
2020-01-03 11:57:10,741 - INFO - [Thread-2] UpdateChecker.UpdateCheckerJob.run [39]: Checking for new version of cura
2020-01-03 11:57:10,745 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UpdateChecker
2020-01-03 11:57:11,371 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin USBPrinting
2020-01-03 11:57:11,732 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade21to22
2020-01-03 11:57:11,831 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade22to24
2020-01-03 11:57:11,884 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade25to26
2020-01-03 11:57:11,948 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade26to27
2020-01-03 11:57:12,017 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade27to30
2020-01-03 11:57:12,079 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade30to31
2020-01-03 11:57:12,132 - INFO - [Thread-2] UpdateChecker.UpdateCheckerJob.run [83]: Found a new version of the software. Spawning message
2020-01-03 11:57:12,158 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade32to33
2020-01-03 11:57:12,214 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade33to34
2020-01-03 11:57:12,277 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade34to35
2020-01-03 11:57:12,329 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade35to40
2020-01-03 11:57:12,368 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade40to41
2020-01-03 11:57:12,418 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade41to42
2020-01-03 11:57:12,472 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade42to43
2020-01-03 11:57:12,536 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimpleView
2020-01-03 11:57:12,582 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin X3DReader
2020-01-03 11:57:12,668 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XmlMaterialProfile
2020-01-03 11:57:12,747 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XRayView
2020-01-03 11:57:12,842 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [171]: Socket state changed to Listening
2020-01-03 11:57:13,023 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: C:\Program Files\Ultimaker Cura 4.3\CuraEngine.exe
2020-01-03 11:57:13,027 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.3\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2020-01-03 11:57:13,032 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [145]: Looking for old configuration files to upgrade.
2020-01-03 11:57:13,041 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,047 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,052 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,056 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,066 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,075 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,083 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,089 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,098 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,105 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,112 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,119 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,126 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,130 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,136 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,140 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,145 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,150 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,154 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,158 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,163 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:57:13,167 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:57:13,174 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [202]: The preferences file cannot be found or it is corrupted, so we will use default values
2020-01-03 11:57:13,181 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [211]: The preferences file 'None' cannot be found, will use default values
2020-01-03 11:57:13,470 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 11:57:13,476 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.3.0
2020-01-03 11:57:13,480 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-01-03 11:57:13,484 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 11:57:13,488 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-01-03 11:57:13,491 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-01-03 11:57:13,495 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-01-03 11:57:13,501 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-01-03 11:57:13,505 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 11:57:13,509 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-01-03 11:57:13,514 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-01-03 11:57:13,518 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-01-03 11:57:13,524 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-01-03 11:57:13,530 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 11:57:13,535 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-01-03 11:57:13,540 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-01-03 11:57:13,854 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [175]: Socket state changed to Connected
2020-01-03 11:57:13,858 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [165]: Backend connected on port 49674
2020-01-03 11:57:33,032 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [342]: Loading metadata into container registry took 19.66999888420105 seconds
2020-01-03 11:57:33,159 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [104]: Select build plate: 0
2020-01-03 11:57:33,166 - INFO - [MainThread] cura.CuraApplication.run [729]: Initializing variant manager
2020-01-03 11:57:33,175 - DEBUG - [MainThread] cura.Machines.VariantManager.initialize [59]: Exclude variant [empty_variant]
2020-01-03 11:57:33,686 - INFO - [MainThread] cura.CuraApplication.run [733]: Initializing material manager
2020-01-03 11:57:33,985 - INFO - [MainThread] cura.CuraApplication.run [738]: Initializing quality manager
2020-01-03 11:57:34,009 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [136]: Lookup tables updated.
2020-01-03 11:57:34,014 - INFO - [MainThread] cura.CuraApplication.run [743]: Initializing machine manager
2020-01-03 11:57:34,020 - INFO - [MainThread] cura.CuraApplication.run [746]: Initializing container manager
2020-01-03 11:57:34,025 - INFO - [MainThread] cura.CuraApplication.run [749]: Initializing machine error checker
2020-01-03 11:57:34,309 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [231]: Changing perspective mode to perspective.
2020-01-03 11:57:38,764 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [281]: Creating post processing plugin view.
2020-01-03 11:57:38,798 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: BQ_PauseAtHeight
2020-01-03 11:57:38,801 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: ChangeAtZ
2020-01-03 11:57:38,812 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-01-03 11:57:38,820 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: FilamentChange
2020-01-03 11:57:38,827 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: InsertAtLayerChange
2020-01-03 11:57:38,830 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeight
2020-01-03 11:57:38,837 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-01-03 11:57:38,847 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightforRepetier
2020-01-03 11:57:38,854 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: SearchAndReplace
2020-01-03 11:57:38,859 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: Stretch
2020-01-03 11:57:38,874 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: TimeLapse
2020-01-03 11:57:38,885 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: UsePreviousProbeMeasurements
2020-01-03 11:57:39,163 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light\theme.json
2020-01-03 11:57:40,198 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light
2020-01-03 11:57:40,945 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [291]: Post processing view created.
2020-01-03 11:57:41,291 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 11:57:41,295 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 11:57:41,300 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 11:57:41,305 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-01-03 11:57:41,330 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.currentExtruderPositions at 0x0000025478C76950> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.extruders instead
2020-01-03 11:57:41,334 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariantBuildplates at 0x0000025478C74C80> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariantBuildplates instead
2020-01-03 11:57:41,340 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel.
2020-01-03 11:57:44,118 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-01-03 11:57:44,131 - DEBUG - [MainThread] UM.Controller.setActiveStage [150]: Setting active stage to PrepareStage
2020-01-03 11:57:44,388 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2020-01-03 11:57:44,393 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.activeMachineHasRemoteConnection at 0x0000025478C71730> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.configuredConnectionTypes instead
2020-01-03 11:57:44,399 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasMaterials at 0x0000025478C74A60> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasMaterials instead
2020-01-03 11:57:44,403 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariants at 0x0000025478C74B70> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariants instead
2020-01-03 11:57:44,499 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:17:39: Unable to assign [undefined] to QString
2020-01-03 11:57:44,502 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:16:44: Unable to assign [undefined] to QString
2020-01-03 11:57:44,634 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 11:57:44,640 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 11:57:44,645 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-01-03 11:57:44,649 - DEBUG - [MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
2020-01-03 11:57:44,686 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [107]: Creating model checker view.
2020-01-03 11:57:44,727 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [116]: Model checker view created.
2020-01-03 11:57:44,728 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [68]: Creating dialog [MoreInfoWindow.qml]
2020-01-03 11:57:44,804 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting packages metadata from server.
2020-01-03 11:57:46,127 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting authors metadata from server.
2020-01-03 11:57:46,138 - DEBUG - [MainThread] cura.CuraApplication.run [786]: Booting Cura took 41.74503207206726 seconds
2020-01-03 11:57:46,148 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [61]: Updating QualityProfilesDropDownMenuModel.
2020-01-03 11:57:46,152 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [66]: No active GlobalStack, set quality profile model as empty.
2020-01-03 11:57:46,156 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2020-01-03 11:57:46,159 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [20]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty.
2020-01-03 11:57:46,540 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [181]: Support for Vertex Array Objects: True
2020-01-03 11:57:46,568 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-01-03 11:57:46,572 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.0.0 - Build 9.17.10.3517
2020-01-03 11:57:46,576 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel
2020-01-03 11:57:46,579 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) HD Graphics 2500
2020-01-03 11:57:46,584 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.0.0
2020-01-03 11:57:46,590 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 11:57:46,620 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\selection.shader]...
2020-01-03 11:57:46,640 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\select_face.shader]...
2020-01-03 11:57:46,653 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 11:57:46,665 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\composite.shader]...
2020-01-03 11:57:46,687 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\overhang.shader]...
2020-01-03 11:57:46,730 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 11:57:46,751 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\transparent_object.shader]...
2020-01-03 11:57:46,769 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 11:57:46,785 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\platform.shader]...
2020-01-03 11:59:14,166 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FileLogger
2020-01-03 11:59:14,227 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdateChecker
2020-01-03 11:59:14,256 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdater
2020-01-03 11:59:14,282 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzReader
2020-01-03 11:59:14,311 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzWriter
2020-01-03 11:59:14,339 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeProfileReader
2020-01-03 11:59:14,394 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeReader
2020-01-03 11:59:14,424 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeWriter
2020-01-03 11:59:14,460 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ImageReader
2020-01-03 11:59:14,489 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LegacyProfileReader
2020-01-03 11:59:14,550 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalContainerProvider
2020-01-03 11:59:14,587 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalFileOutputDevice
2020-01-03 11:59:14,615 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MachineSettingsAction
2020-01-03 11:59:14,651 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ModelChecker
2020-01-03 11:59:14,679 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MonitorStage
2020-01-03 11:59:14,715 - WARNING - [MainThread] UM.Preferences.getValue [97]: Tried to get the value of non-existing setting cura/active_mode.
2020-01-03 11:59:14,721 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PerObjectSettingsTool
2020-01-03 11:59:14,762 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PostProcessingPlugin
2020-01-03 11:59:14,791 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PrepareStage
2020-01-03 11:59:14,821 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PreviewStage
2020-01-03 11:59:14,886 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RemovableDriveOutputDevice
2020-01-03 11:59:14,949 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimulationView
2020-01-03 11:59:14,996 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SliceInfoPlugin
2020-01-03 11:59:15,028 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SolidView
2020-01-03 11:59:15,063 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SupportEraser
2020-01-03 11:59:15,132 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [116]: No auth data to retrieve the access_token from
2020-01-03 11:59:15,139 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin Toolbox
2020-01-03 11:59:15,173 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin CameraTool
2020-01-03 11:59:15,213 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MirrorTool
2020-01-03 11:59:15,255 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RotateTool
2020-01-03 11:59:15,299 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ScaleTool
2020-01-03 11:59:15,353 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SelectionTool
2020-01-03 11:59:15,395 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TranslateTool
2020-01-03 11:59:15,429 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TrimeshReader
2020-01-03 11:59:15,477 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPReader
2020-01-03 11:59:15,513 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPWriter
2020-01-03 11:59:15,562 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UltimakerMachineActions
2020-01-03 11:59:16,011 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UM3NetworkPrinting
2020-01-03 11:59:16,061 - INFO - [Thread-2] UpdateChecker.UpdateCheckerJob.run [39]: Checking for new version of cura
2020-01-03 11:59:16,074 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UpdateChecker
2020-01-03 11:59:16,516 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin USBPrinting
2020-01-03 11:59:16,739 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade21to22
2020-01-03 11:59:16,811 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade22to24
2020-01-03 11:59:16,888 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade25to26
2020-01-03 11:59:16,976 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade26to27
2020-01-03 11:59:17,059 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade27to30
2020-01-03 11:59:17,100 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade30to31
2020-01-03 11:59:17,139 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade32to33
2020-01-03 11:59:17,175 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade33to34
2020-01-03 11:59:17,213 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade34to35
2020-01-03 11:59:17,328 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade35to40
2020-01-03 11:59:17,368 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade40to41
2020-01-03 11:59:17,407 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade41to42
2020-01-03 11:59:17,445 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade42to43
2020-01-03 11:59:17,484 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimpleView
2020-01-03 11:59:17,562 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin X3DReader
2020-01-03 11:59:17,642 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XmlMaterialProfile
2020-01-03 11:59:17,689 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XRayView
2020-01-03 11:59:17,707 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [145]: Looking for old configuration files to upgrade.
2020-01-03 11:59:17,715 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,720 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,725 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,729 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,735 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,739 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,745 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,749 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,754 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,758 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,763 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,767 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,773 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,777 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,782 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,787 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,792 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,796 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,801 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,805 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,810 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 11:59:17,814 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 11:59:17,830 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [171]: Socket state changed to Listening
2020-01-03 11:59:17,876 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: C:\Program Files\Ultimaker Cura 4.3\CuraEngine.exe
2020-01-03 11:59:17,880 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.3\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2020-01-03 11:59:18,021 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 11:59:18,025 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.3.0
2020-01-03 11:59:18,031 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-01-03 11:59:18,036 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 11:59:18,041 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-01-03 11:59:18,045 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-01-03 11:59:18,050 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-01-03 11:59:18,054 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-01-03 11:59:18,057 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 11:59:18,060 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-01-03 11:59:18,064 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-01-03 11:59:18,067 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-01-03 11:59:18,074 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-01-03 11:59:18,078 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 11:59:18,081 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-01-03 11:59:18,086 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-01-03 11:59:18,093 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [175]: Socket state changed to Connected
2020-01-03 11:59:18,096 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [165]: Backend connected on port 49674
2020-01-03 11:59:21,202 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [342]: Loading metadata into container registry took 3.0803418159484863 seconds
2020-01-03 11:59:21,322 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [104]: Select build plate: 0
2020-01-03 11:59:21,326 - INFO - [MainThread] cura.CuraApplication.run [729]: Initializing variant manager
2020-01-03 11:59:21,335 - DEBUG - [MainThread] cura.Machines.VariantManager.initialize [59]: Exclude variant [empty_variant]
2020-01-03 11:59:21,437 - INFO - [MainThread] cura.CuraApplication.run [733]: Initializing material manager
2020-01-03 11:59:21,510 - INFO - [MainThread] cura.CuraApplication.run [738]: Initializing quality manager
2020-01-03 11:59:21,531 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [136]: Lookup tables updated.
2020-01-03 11:59:21,535 - INFO - [MainThread] cura.CuraApplication.run [743]: Initializing machine manager
2020-01-03 11:59:21,539 - INFO - [MainThread] cura.CuraApplication.run [746]: Initializing container manager
2020-01-03 11:59:21,542 - INFO - [MainThread] cura.CuraApplication.run [749]: Initializing machine error checker
2020-01-03 11:59:21,590 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [231]: Changing perspective mode to perspective.
2020-01-03 11:59:25,321 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [281]: Creating post processing plugin view.
2020-01-03 11:59:25,344 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: BQ_PauseAtHeight
2020-01-03 11:59:25,353 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: ChangeAtZ
2020-01-03 11:59:25,368 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-01-03 11:59:25,376 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: FilamentChange
2020-01-03 11:59:25,383 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: InsertAtLayerChange
2020-01-03 11:59:25,393 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeight
2020-01-03 11:59:25,533 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-01-03 11:59:25,541 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightforRepetier
2020-01-03 11:59:25,548 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: SearchAndReplace
2020-01-03 11:59:25,559 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: Stretch
2020-01-03 11:59:25,567 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: TimeLapse
2020-01-03 11:59:25,575 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: UsePreviousProbeMeasurements
2020-01-03 11:59:25,860 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light\theme.json
2020-01-03 11:59:26,891 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light
2020-01-03 11:59:27,623 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [291]: Post processing view created.
2020-01-03 11:59:28,190 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 11:59:28,197 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 11:59:28,203 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 11:59:28,208 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-01-03 11:59:28,328 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.currentExtruderPositions at 0x0000026D0BBB6950> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.extruders instead
2020-01-03 11:59:28,334 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariantBuildplates at 0x0000026D0BBB4C80> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariantBuildplates instead
2020-01-03 11:59:28,340 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel.
2020-01-03 11:59:30,732 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-01-03 11:59:30,745 - DEBUG - [MainThread] UM.Controller.setActiveStage [150]: Setting active stage to PrepareStage
2020-01-03 11:59:31,250 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2020-01-03 11:59:31,256 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.activeMachineHasRemoteConnection at 0x0000026D0BBB1730> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.configuredConnectionTypes instead
2020-01-03 11:59:31,262 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasMaterials at 0x0000026D0BBB4A60> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasMaterials instead
2020-01-03 11:59:31,266 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariants at 0x0000026D0BBB4B70> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariants instead
2020-01-03 11:59:31,342 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:17:39: Unable to assign [undefined] to QString
2020-01-03 11:59:31,346 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:16:44: Unable to assign [undefined] to QString
2020-01-03 11:59:31,581 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 11:59:31,586 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 11:59:31,592 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-01-03 11:59:31,597 - DEBUG - [MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
2020-01-03 11:59:31,602 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [107]: Creating model checker view.
2020-01-03 11:59:31,664 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [116]: Model checker view created.
2020-01-03 11:59:31,665 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [68]: Creating dialog [MoreInfoWindow.qml]
2020-01-03 11:59:31,750 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting packages metadata from server.
2020-01-03 11:59:32,858 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting authors metadata from server.
2020-01-03 11:59:32,866 - DEBUG - [MainThread] cura.CuraApplication.run [786]: Booting Cura took 20.47891616821289 seconds
2020-01-03 11:59:32,877 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [61]: Updating QualityProfilesDropDownMenuModel.
2020-01-03 11:59:32,882 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [66]: No active GlobalStack, set quality profile model as empty.
2020-01-03 11:59:32,888 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2020-01-03 11:59:32,892 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [20]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty.
2020-01-03 11:59:33,204 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [181]: Support for Vertex Array Objects: True
2020-01-03 11:59:33,216 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-01-03 11:59:33,220 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.0.0 - Build 9.17.10.3517
2020-01-03 11:59:33,223 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel
2020-01-03 11:59:33,227 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) HD Graphics 2500
2020-01-03 11:59:33,232 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.0.0
2020-01-03 11:59:33,237 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 11:59:33,260 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\selection.shader]...
2020-01-03 11:59:33,280 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\select_face.shader]...
2020-01-03 11:59:33,300 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 11:59:33,311 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\composite.shader]...
2020-01-03 11:59:33,329 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\overhang.shader]...
2020-01-03 11:59:33,351 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 11:59:33,375 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\transparent_object.shader]...
2020-01-03 11:59:33,395 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 11:59:33,410 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\platform.shader]...
2020-01-03 12:00:09,045 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FileLogger
2020-01-03 12:00:09,063 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdateChecker
2020-01-03 12:00:09,082 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdater
2020-01-03 12:00:09,097 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzReader
2020-01-03 12:00:09,113 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzWriter
2020-01-03 12:00:09,130 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeProfileReader
2020-01-03 12:00:09,156 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeReader
2020-01-03 12:00:09,173 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeWriter
2020-01-03 12:00:09,192 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ImageReader
2020-01-03 12:00:09,209 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LegacyProfileReader
2020-01-03 12:00:09,226 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalContainerProvider
2020-01-03 12:00:09,245 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalFileOutputDevice
2020-01-03 12:00:09,262 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MachineSettingsAction
2020-01-03 12:00:09,279 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ModelChecker
2020-01-03 12:00:09,299 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MonitorStage
2020-01-03 12:00:09,317 - WARNING - [MainThread] UM.Preferences.getValue [97]: Tried to get the value of non-existing setting cura/active_mode.
2020-01-03 12:00:09,323 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PerObjectSettingsTool
2020-01-03 12:00:09,341 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PostProcessingPlugin
2020-01-03 12:00:09,362 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PrepareStage
2020-01-03 12:00:09,379 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PreviewStage
2020-01-03 12:00:09,401 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RemovableDriveOutputDevice
2020-01-03 12:00:09,431 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimulationView
2020-01-03 12:00:09,452 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SliceInfoPlugin
2020-01-03 12:00:09,471 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SolidView
2020-01-03 12:00:09,493 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SupportEraser
2020-01-03 12:00:09,518 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [116]: No auth data to retrieve the access_token from
2020-01-03 12:00:09,525 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin Toolbox
2020-01-03 12:00:09,548 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin CameraTool
2020-01-03 12:00:09,572 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MirrorTool
2020-01-03 12:00:09,597 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RotateTool
2020-01-03 12:00:09,622 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ScaleTool
2020-01-03 12:00:09,642 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SelectionTool
2020-01-03 12:00:09,666 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TranslateTool
2020-01-03 12:00:09,687 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TrimeshReader
2020-01-03 12:00:09,718 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPReader
2020-01-03 12:00:09,743 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPWriter
2020-01-03 12:00:09,768 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UltimakerMachineActions
2020-01-03 12:00:09,891 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UM3NetworkPrinting
2020-01-03 12:00:09,924 - INFO - [Thread-2] UpdateChecker.UpdateCheckerJob.run [39]: Checking for new version of cura
2020-01-03 12:00:09,929 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UpdateChecker
2020-01-03 12:00:10,103 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin USBPrinting
2020-01-03 12:00:10,862 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade21to22
2020-01-03 12:00:11,048 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade22to24
2020-01-03 12:00:11,074 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade25to26
2020-01-03 12:00:11,100 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade26to27
2020-01-03 12:00:11,128 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade27to30
2020-01-03 12:00:11,153 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade30to31
2020-01-03 12:00:11,183 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade32to33
2020-01-03 12:00:11,209 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade33to34
2020-01-03 12:00:11,234 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade34to35
2020-01-03 12:00:11,259 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade35to40
2020-01-03 12:00:11,287 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade40to41
2020-01-03 12:00:11,350 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade41to42
2020-01-03 12:00:11,375 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade42to43
2020-01-03 12:00:11,403 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimpleView
2020-01-03 12:00:11,430 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin X3DReader
2020-01-03 12:00:11,491 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XmlMaterialProfile
2020-01-03 12:00:11,519 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XRayView
2020-01-03 12:00:11,546 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [145]: Looking for old configuration files to upgrade.
2020-01-03 12:00:11,560 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,565 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,573 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,579 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,588 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,594 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,603 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,608 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,616 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,622 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,630 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,636 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,645 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,651 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,659 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,664 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,673 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,678 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,687 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,693 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,701 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:00:11,707 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:00:11,731 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [171]: Socket state changed to Listening
2020-01-03 12:00:11,758 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: C:\Program Files\Ultimaker Cura 4.3\CuraEngine.exe
2020-01-03 12:00:11,762 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.3\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2020-01-03 12:00:12,376 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:00:12,380 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.3.0
2020-01-03 12:00:12,387 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-01-03 12:00:12,392 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:00:12,396 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-01-03 12:00:12,402 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-01-03 12:00:12,406 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-01-03 12:00:12,411 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-01-03 12:00:12,415 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:00:12,418 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-01-03 12:00:12,422 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-01-03 12:00:12,426 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-01-03 12:00:12,429 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-01-03 12:00:12,433 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:00:12,437 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-01-03 12:00:12,440 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-01-03 12:00:12,449 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [175]: Socket state changed to Connected
2020-01-03 12:00:12,453 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [165]: Backend connected on port 49674
2020-01-03 12:00:25,353 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [342]: Loading metadata into container registry took 12.893068790435791 seconds
2020-01-03 12:00:26,371 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [104]: Select build plate: 0
2020-01-03 12:00:26,375 - INFO - [MainThread] cura.CuraApplication.run [729]: Initializing variant manager
2020-01-03 12:00:26,728 - DEBUG - [MainThread] cura.Machines.VariantManager.initialize [59]: Exclude variant [empty_variant]
2020-01-03 12:00:26,733 - INFO - [MainThread] cura.CuraApplication.run [733]: Initializing material manager
2020-01-03 12:00:26,986 - INFO - [MainThread] cura.CuraApplication.run [738]: Initializing quality manager
2020-01-03 12:00:27,041 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [136]: Lookup tables updated.
2020-01-03 12:00:27,045 - INFO - [MainThread] cura.CuraApplication.run [743]: Initializing machine manager
2020-01-03 12:00:27,051 - INFO - [MainThread] cura.CuraApplication.run [746]: Initializing container manager
2020-01-03 12:00:27,054 - INFO - [MainThread] cura.CuraApplication.run [749]: Initializing machine error checker
2020-01-03 12:00:27,239 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [231]: Changing perspective mode to perspective.
2020-01-03 12:00:32,583 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [281]: Creating post processing plugin view.
2020-01-03 12:00:32,587 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: BQ_PauseAtHeight
2020-01-03 12:00:32,588 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: ChangeAtZ
2020-01-03 12:00:32,591 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-01-03 12:00:32,593 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: FilamentChange
2020-01-03 12:00:32,595 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: InsertAtLayerChange
2020-01-03 12:00:32,597 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeight
2020-01-03 12:00:32,598 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-01-03 12:00:32,600 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightforRepetier
2020-01-03 12:00:32,601 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: SearchAndReplace
2020-01-03 12:00:32,603 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: Stretch
2020-01-03 12:00:32,605 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: TimeLapse
2020-01-03 12:00:32,606 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: UsePreviousProbeMeasurements
2020-01-03 12:00:33,266 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light\theme.json
2020-01-03 12:00:33,909 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light
2020-01-03 12:00:34,785 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [291]: Post processing view created.
2020-01-03 12:00:35,366 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 12:00:35,370 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 12:00:35,376 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 12:00:35,381 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-01-03 12:00:35,431 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.currentExtruderPositions at 0x000001FE5E5F6950> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.extruders instead
2020-01-03 12:00:35,436 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariantBuildplates at 0x000001FE5E5F4C80> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariantBuildplates instead
2020-01-03 12:00:35,444 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel.
2020-01-03 12:00:38,326 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-01-03 12:00:38,356 - DEBUG - [MainThread] UM.Controller.setActiveStage [150]: Setting active stage to PrepareStage
2020-01-03 12:00:39,076 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2020-01-03 12:00:39,084 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.activeMachineHasRemoteConnection at 0x000001FE5E5F1730> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.configuredConnectionTypes instead
2020-01-03 12:00:39,092 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasMaterials at 0x000001FE5E5F4A60> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasMaterials instead
2020-01-03 12:00:39,096 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariants at 0x000001FE5E5F4B70> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariants instead
2020-01-03 12:00:39,187 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:17:39: Unable to assign [undefined] to QString
2020-01-03 12:00:39,191 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:16:44: Unable to assign [undefined] to QString
2020-01-03 12:00:39,575 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 12:00:39,583 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 12:00:39,590 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-01-03 12:00:39,595 - DEBUG - [MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
2020-01-03 12:00:39,621 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [107]: Creating model checker view.
2020-01-03 12:00:39,678 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [116]: Model checker view created.
2020-01-03 12:00:39,679 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [68]: Creating dialog [MoreInfoWindow.qml]
2020-01-03 12:00:39,788 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting packages metadata from server.
2020-01-03 12:00:41,098 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting authors metadata from server.
2020-01-03 12:00:41,109 - DEBUG - [MainThread] cura.CuraApplication.run [786]: Booting Cura took 34.97481846809387 seconds
2020-01-03 12:00:41,147 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [61]: Updating QualityProfilesDropDownMenuModel.
2020-01-03 12:00:41,152 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [66]: No active GlobalStack, set quality profile model as empty.
2020-01-03 12:00:41,156 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2020-01-03 12:00:41,160 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [20]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty.
2020-01-03 12:00:41,628 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [181]: Support for Vertex Array Objects: True
2020-01-03 12:00:41,641 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-01-03 12:00:41,645 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.0.0 - Build 9.17.10.3517
2020-01-03 12:00:41,648 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel
2020-01-03 12:00:41,652 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) HD Graphics 2500
2020-01-03 12:00:41,656 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.0.0
2020-01-03 12:00:41,660 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 12:00:41,698 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\selection.shader]...
2020-01-03 12:00:41,731 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\select_face.shader]...
2020-01-03 12:00:41,764 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 12:00:41,802 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\composite.shader]...
2020-01-03 12:00:41,866 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\overhang.shader]...
2020-01-03 12:00:41,911 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 12:00:41,971 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\transparent_object.shader]...
2020-01-03 12:00:42,006 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 12:00:42,062 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\platform.shader]...
2020-01-03 12:01:19,204 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FileLogger
2020-01-03 12:01:19,223 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdateChecker
2020-01-03 12:01:19,243 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdater
2020-01-03 12:01:19,257 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzReader
2020-01-03 12:01:19,273 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzWriter
2020-01-03 12:01:19,289 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeProfileReader
2020-01-03 12:01:19,315 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeReader
2020-01-03 12:01:19,332 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeWriter
2020-01-03 12:01:19,350 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ImageReader
2020-01-03 12:01:19,368 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LegacyProfileReader
2020-01-03 12:01:19,383 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalContainerProvider
2020-01-03 12:01:19,403 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalFileOutputDevice
2020-01-03 12:01:19,420 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MachineSettingsAction
2020-01-03 12:01:19,437 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ModelChecker
2020-01-03 12:01:19,456 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MonitorStage
2020-01-03 12:01:19,474 - WARNING - [MainThread] UM.Preferences.getValue [97]: Tried to get the value of non-existing setting cura/active_mode.
2020-01-03 12:01:19,480 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PerObjectSettingsTool
2020-01-03 12:01:19,498 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PostProcessingPlugin
2020-01-03 12:01:19,518 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PrepareStage
2020-01-03 12:01:19,536 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PreviewStage
2020-01-03 12:01:19,557 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RemovableDriveOutputDevice
2020-01-03 12:01:19,586 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimulationView
2020-01-03 12:01:19,607 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SliceInfoPlugin
2020-01-03 12:01:19,627 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SolidView
2020-01-03 12:01:19,648 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SupportEraser
2020-01-03 12:01:19,673 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [116]: No auth data to retrieve the access_token from
2020-01-03 12:01:19,679 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin Toolbox
2020-01-03 12:01:19,702 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin CameraTool
2020-01-03 12:01:19,726 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MirrorTool
2020-01-03 12:01:19,751 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RotateTool
2020-01-03 12:01:19,775 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ScaleTool
2020-01-03 12:01:19,794 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SelectionTool
2020-01-03 12:01:19,818 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TranslateTool
2020-01-03 12:01:19,839 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TrimeshReader
2020-01-03 12:01:19,870 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPReader
2020-01-03 12:01:19,894 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPWriter
2020-01-03 12:01:19,920 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UltimakerMachineActions
2020-01-03 12:01:20,040 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UM3NetworkPrinting
2020-01-03 12:01:20,073 - INFO - [Thread-2] UpdateChecker.UpdateCheckerJob.run [39]: Checking for new version of cura
2020-01-03 12:01:20,091 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UpdateChecker
2020-01-03 12:01:21,095 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin USBPrinting
2020-01-03 12:01:21,128 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade21to22
2020-01-03 12:01:21,153 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade22to24
2020-01-03 12:01:21,181 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade25to26
2020-01-03 12:01:21,206 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade26to27
2020-01-03 12:01:21,231 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade27to30
2020-01-03 12:01:21,255 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade30to31
2020-01-03 12:01:21,287 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade32to33
2020-01-03 12:01:21,311 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade33to34
2020-01-03 12:01:21,337 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade34to35
2020-01-03 12:01:21,362 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade35to40
2020-01-03 12:01:21,387 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade40to41
2020-01-03 12:01:21,451 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade41to42
2020-01-03 12:01:21,476 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade42to43
2020-01-03 12:01:21,503 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimpleView
2020-01-03 12:01:21,530 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin X3DReader
2020-01-03 12:01:21,591 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XmlMaterialProfile
2020-01-03 12:01:21,620 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XRayView
2020-01-03 12:01:21,647 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [145]: Looking for old configuration files to upgrade.
2020-01-03 12:01:21,661 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,666 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,674 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,680 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,689 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,694 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,702 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,708 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,716 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,722 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,730 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,735 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,745 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,750 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,759 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,764 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,772 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,778 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,786 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,792 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,800 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:01:21,806 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:01:21,829 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [171]: Socket state changed to Listening
2020-01-03 12:01:21,866 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: C:\Program Files\Ultimaker Cura 4.3\CuraEngine.exe
2020-01-03 12:01:21,871 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.3\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2020-01-03 12:01:22,485 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:01:22,489 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.3.0
2020-01-03 12:01:22,494 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-01-03 12:01:22,497 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:01:22,501 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-01-03 12:01:22,504 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-01-03 12:01:22,508 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-01-03 12:01:22,515 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-01-03 12:01:22,518 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:01:22,522 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-01-03 12:01:22,526 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-01-03 12:01:22,529 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-01-03 12:01:22,533 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-01-03 12:01:22,537 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:01:22,540 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-01-03 12:01:22,544 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-01-03 12:01:22,554 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [175]: Socket state changed to Connected
2020-01-03 12:01:22,557 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [165]: Backend connected on port 49674
2020-01-03 12:01:35,485 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [342]: Loading metadata into container registry took 12.922039031982422 seconds
2020-01-03 12:01:36,511 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [104]: Select build plate: 0
2020-01-03 12:01:36,515 - INFO - [MainThread] cura.CuraApplication.run [729]: Initializing variant manager
2020-01-03 12:01:36,860 - DEBUG - [MainThread] cura.Machines.VariantManager.initialize [59]: Exclude variant [empty_variant]
2020-01-03 12:01:36,876 - INFO - [MainThread] cura.CuraApplication.run [733]: Initializing material manager
2020-01-03 12:01:37,055 - INFO - [MainThread] cura.CuraApplication.run [738]: Initializing quality manager
2020-01-03 12:01:37,110 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [136]: Lookup tables updated.
2020-01-03 12:01:37,114 - INFO - [MainThread] cura.CuraApplication.run [743]: Initializing machine manager
2020-01-03 12:01:37,119 - INFO - [MainThread] cura.CuraApplication.run [746]: Initializing container manager
2020-01-03 12:01:37,123 - INFO - [MainThread] cura.CuraApplication.run [749]: Initializing machine error checker
2020-01-03 12:01:37,215 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [231]: Changing perspective mode to perspective.
2020-01-03 12:01:41,049 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [281]: Creating post processing plugin view.
2020-01-03 12:01:41,053 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: BQ_PauseAtHeight
2020-01-03 12:01:41,055 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: ChangeAtZ
2020-01-03 12:01:41,057 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-01-03 12:01:41,060 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: FilamentChange
2020-01-03 12:01:41,061 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: InsertAtLayerChange
2020-01-03 12:01:41,063 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeight
2020-01-03 12:01:41,065 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-01-03 12:01:41,067 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightforRepetier
2020-01-03 12:01:41,068 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: SearchAndReplace
2020-01-03 12:01:41,070 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: Stretch
2020-01-03 12:01:41,072 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: TimeLapse
2020-01-03 12:01:41,074 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: UsePreviousProbeMeasurements
2020-01-03 12:01:41,751 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light\theme.json
2020-01-03 12:01:41,884 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light
2020-01-03 12:01:42,587 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [291]: Post processing view created.
2020-01-03 12:01:42,906 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 12:01:42,911 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 12:01:42,916 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 12:01:42,923 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-01-03 12:01:42,936 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.currentExtruderPositions at 0x000001C21DA26950> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.extruders instead
2020-01-03 12:01:42,940 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariantBuildplates at 0x000001C21DA24C80> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariantBuildplates instead
2020-01-03 12:01:42,948 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel.
2020-01-03 12:01:45,752 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-01-03 12:01:45,781 - DEBUG - [MainThread] UM.Controller.setActiveStage [150]: Setting active stage to PrepareStage
2020-01-03 12:01:46,485 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2020-01-03 12:01:46,493 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.activeMachineHasRemoteConnection at 0x000001C21DA21730> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.configuredConnectionTypes instead
2020-01-03 12:01:46,501 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasMaterials at 0x000001C21DA24A60> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasMaterials instead
2020-01-03 12:01:46,505 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariants at 0x000001C21DA24B70> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariants instead
2020-01-03 12:01:46,597 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:17:39: Unable to assign [undefined] to QString
2020-01-03 12:01:46,601 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:16:44: Unable to assign [undefined] to QString
2020-01-03 12:01:46,964 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 12:01:46,972 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 12:01:46,979 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-01-03 12:01:46,984 - DEBUG - [MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
2020-01-03 12:01:46,994 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [107]: Creating model checker view.
2020-01-03 12:01:47,042 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [116]: Model checker view created.
2020-01-03 12:01:47,043 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [68]: Creating dialog [MoreInfoWindow.qml]
2020-01-03 12:01:47,154 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting packages metadata from server.
2020-01-03 12:01:48,271 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting authors metadata from server.
2020-01-03 12:01:48,282 - DEBUG - [MainThread] cura.CuraApplication.run [786]: Booting Cura took 31.649290800094604 seconds
2020-01-03 12:01:48,319 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [61]: Updating QualityProfilesDropDownMenuModel.
2020-01-03 12:01:48,323 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [66]: No active GlobalStack, set quality profile model as empty.
2020-01-03 12:01:48,327 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2020-01-03 12:01:48,331 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [20]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty.
2020-01-03 12:01:48,785 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [181]: Support for Vertex Array Objects: True
2020-01-03 12:01:48,798 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-01-03 12:01:48,802 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.0.0 - Build 9.17.10.3517
2020-01-03 12:01:48,806 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel
2020-01-03 12:01:48,809 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) HD Graphics 2500
2020-01-03 12:01:48,813 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.0.0
2020-01-03 12:01:48,818 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 12:01:48,856 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\selection.shader]...
2020-01-03 12:01:48,890 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\select_face.shader]...
2020-01-03 12:01:48,923 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 12:01:48,961 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\composite.shader]...
2020-01-03 12:01:49,026 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\overhang.shader]...
2020-01-03 12:01:49,070 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 12:01:49,126 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\transparent_object.shader]...
2020-01-03 12:01:49,162 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 12:01:49,218 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\platform.shader]...
2020-01-03 12:02:43,873 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FileLogger
2020-01-03 12:02:43,890 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdateChecker
2020-01-03 12:02:43,906 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin FirmwareUpdater
2020-01-03 12:02:43,920 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzReader
2020-01-03 12:02:43,934 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeGzWriter
2020-01-03 12:02:43,949 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeProfileReader
2020-01-03 12:02:43,968 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeReader
2020-01-03 12:02:43,984 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin GCodeWriter
2020-01-03 12:02:44,001 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ImageReader
2020-01-03 12:02:44,016 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LegacyProfileReader
2020-01-03 12:02:44,030 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalContainerProvider
2020-01-03 12:02:44,046 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin LocalFileOutputDevice
2020-01-03 12:02:44,061 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MachineSettingsAction
2020-01-03 12:02:44,077 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ModelChecker
2020-01-03 12:02:44,094 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MonitorStage
2020-01-03 12:02:44,109 - WARNING - [MainThread] UM.Preferences.getValue [97]: Tried to get the value of non-existing setting cura/active_mode.
2020-01-03 12:02:44,115 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PerObjectSettingsTool
2020-01-03 12:02:44,130 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PostProcessingPlugin
2020-01-03 12:02:44,148 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PrepareStage
2020-01-03 12:02:44,164 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin PreviewStage
2020-01-03 12:02:44,182 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RemovableDriveOutputDevice
2020-01-03 12:02:44,206 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimulationView
2020-01-03 12:02:44,224 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SliceInfoPlugin
2020-01-03 12:02:44,242 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SolidView
2020-01-03 12:02:44,260 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SupportEraser
2020-01-03 12:02:44,279 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [116]: No auth data to retrieve the access_token from
2020-01-03 12:02:44,285 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin Toolbox
2020-01-03 12:02:44,306 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin CameraTool
2020-01-03 12:02:44,327 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin MirrorTool
2020-01-03 12:02:44,349 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin RotateTool
2020-01-03 12:02:44,370 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin ScaleTool
2020-01-03 12:02:44,388 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SelectionTool
2020-01-03 12:02:44,409 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TranslateTool
2020-01-03 12:02:44,428 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin TrimeshReader
2020-01-03 12:02:44,454 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPReader
2020-01-03 12:02:44,475 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UFPWriter
2020-01-03 12:02:44,497 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UltimakerMachineActions
2020-01-03 12:02:44,585 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UM3NetworkPrinting
2020-01-03 12:02:44,613 - INFO - [Thread-2] UpdateChecker.UpdateCheckerJob.run [39]: Checking for new version of cura
2020-01-03 12:02:44,625 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin UpdateChecker
2020-01-03 12:02:44,845 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin USBPrinting
2020-01-03 12:02:44,920 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade21to22
2020-01-03 12:02:44,960 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade22to24
2020-01-03 12:02:45,002 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade25to26
2020-01-03 12:02:45,043 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade26to27
2020-01-03 12:02:45,083 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade27to30
2020-01-03 12:02:45,131 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade30to31
2020-01-03 12:02:45,170 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade32to33
2020-01-03 12:02:45,205 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade33to34
2020-01-03 12:02:45,244 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade34to35
2020-01-03 12:02:45,288 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade35to40
2020-01-03 12:02:45,331 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade40to41
2020-01-03 12:02:45,371 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade41to42
2020-01-03 12:02:45,412 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin VersionUpgrade42to43
2020-01-03 12:02:45,451 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin SimpleView
2020-01-03 12:02:45,485 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin X3DReader
2020-01-03 12:02:45,568 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XmlMaterialProfile
2020-01-03 12:02:45,622 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [394]: Loaded plugin XRayView
2020-01-03 12:02:45,646 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [145]: Looking for old configuration files to upgrade.
2020-01-03 12:02:45,656 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,661 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,669 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,673 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,678 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,682 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,689 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,695 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,700 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,704 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,709 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,713 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,718 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,723 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,728 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,733 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,739 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,743 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,749 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,753 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,758 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\packages.json, skip it
2020-01-03 12:02:45,762 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [306]: Failed to get file version: .\plugins.json, skip it
2020-01-03 12:02:45,778 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [171]: Socket state changed to Listening
2020-01-03 12:02:45,803 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: C:\Program Files\Ultimaker Cura 4.3\CuraEngine.exe
2020-01-03 12:02:45,806 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.3\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2020-01-03 12:02:45,947 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:02:45,953 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.3.0
2020-01-03 12:02:45,957 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-01-03 12:02:45,961 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:02:45,968 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [175]: Socket state changed to Connected
2020-01-03 12:02:45,973 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-01-03 12:02:45,978 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [165]: Backend connected on port 49674
2020-01-03 12:02:45,980 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-01-03 12:02:45,984 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-01-03 12:02:45,988 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-01-03 12:02:45,991 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:02:45,995 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-01-03 12:02:46,001 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-01-03 12:02:46,005 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-01-03 12:02:46,008 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-01-03 12:02:46,012 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-01-03 12:02:46,015 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-01-03 12:02:46,019 - DEBUG - [Thread-9] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-01-03 12:02:49,035 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [342]: Loading metadata into container registry took 3.0346553325653076 seconds
2020-01-03 12:02:49,153 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [104]: Select build plate: 0
2020-01-03 12:02:49,157 - INFO - [MainThread] cura.CuraApplication.run [729]: Initializing variant manager
2020-01-03 12:02:49,231 - DEBUG - [MainThread] cura.Machines.VariantManager.initialize [59]: Exclude variant [empty_variant]
2020-01-03 12:02:49,240 - INFO - [MainThread] cura.CuraApplication.run [733]: Initializing material manager
2020-01-03 12:02:49,312 - INFO - [MainThread] cura.CuraApplication.run [738]: Initializing quality manager
2020-01-03 12:02:49,333 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [136]: Lookup tables updated.
2020-01-03 12:02:49,337 - INFO - [MainThread] cura.CuraApplication.run [743]: Initializing machine manager
2020-01-03 12:02:49,341 - INFO - [MainThread] cura.CuraApplication.run [746]: Initializing container manager
2020-01-03 12:02:49,345 - INFO - [MainThread] cura.CuraApplication.run [749]: Initializing machine error checker
2020-01-03 12:02:49,398 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [231]: Changing perspective mode to perspective.
2020-01-03 12:02:51,169 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [281]: Creating post processing plugin view.
2020-01-03 12:02:51,172 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: BQ_PauseAtHeight
2020-01-03 12:02:51,173 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: ChangeAtZ
2020-01-03 12:02:51,174 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-01-03 12:02:51,175 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: FilamentChange
2020-01-03 12:02:51,176 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: InsertAtLayerChange
2020-01-03 12:02:51,177 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeight
2020-01-03 12:02:51,178 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-01-03 12:02:51,179 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: PauseAtHeightforRepetier
2020-01-03 12:02:51,179 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: SearchAndReplace
2020-01-03 12:02:51,180 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: Stretch
2020-01-03 12:02:51,181 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: TimeLapse
2020-01-03 12:02:51,182 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [170]: Begin loading of script: UsePreviousProbeMeasurements
2020-01-03 12:02:51,436 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light\theme.json
2020-01-03 12:02:51,546 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.3\resources\themes\cura-light
2020-01-03 12:02:52,038 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [291]: Post processing view created.
2020-01-03 12:02:52,154 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 12:02:52,158 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 12:02:52,162 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [93]: There was no auth data or access token
2020-01-03 12:02:52,167 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-01-03 12:02:52,175 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.currentExtruderPositions at 0x000001E8D4476950> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.extruders instead
2020-01-03 12:02:52,179 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariantBuildplates at 0x000001E8D4474C80> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariantBuildplates instead
2020-01-03 12:02:52,185 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel.
2020-01-03 12:02:53,666 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-01-03 12:02:53,680 - DEBUG - [MainThread] UM.Controller.setActiveStage [150]: Setting active stage to PrepareStage
2020-01-03 12:02:53,973 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2020-01-03 12:02:53,978 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.activeMachineHasRemoteConnection at 0x000001E8D4471730> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.configuredConnectionTypes instead
2020-01-03 12:02:53,984 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasMaterials at 0x000001E8D4474A60> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasMaterials instead
2020-01-03 12:02:53,988 - WARNING - [MainThread] UM.Decorators.deprecated_function [19]: <function MachineManager.hasVariants at 0x000001E8D4474B70> is deprecated (since 4.2): use Cura.MachineManager.activeMachine.hasVariants instead
2020-01-03 12:02:54,048 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:17:39: Unable to assign [undefined] to QString
2020-01-03 12:02:54,052 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/Menus/MaterialMenu.qml:16:44: Unable to assign [undefined] to QString
2020-01-03 12:02:54,222 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 12:02:54,227 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-01-03 12:02:54,232 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///C:/Program Files/Ultimaker Cura 4.3/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-01-03 12:02:54,236 - DEBUG - [MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
2020-01-03 12:02:54,242 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [107]: Creating model checker view.
2020-01-03 12:02:54,279 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [116]: Model checker view created.
2020-01-03 12:02:54,279 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [68]: Creating dialog [MoreInfoWindow.qml]
2020-01-03 12:02:54,326 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting packages metadata from server.
2020-01-03 12:02:55,429 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [529]: Requesting authors metadata from server.
2020-01-03 12:02:55,438 - DEBUG - [MainThread] cura.CuraApplication.run [786]: Booting Cura took 12.999492645263672 seconds
2020-01-03 12:02:55,446 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2020-01-03 12:02:55,451 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [20]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty.
2020-01-03 12:02:55,461 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [61]: Updating QualityProfilesDropDownMenuModel.
2020-01-03 12:02:55,465 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [66]: No active GlobalStack, set quality profile model as empty.
2020-01-03 12:02:55,767 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [181]: Support for Vertex Array Objects: True
2020-01-03 12:02:55,780 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-01-03 12:02:55,785 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.0.0 - Build 9.17.10.3517
2020-01-03 12:02:55,788 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel
2020-01-03 12:02:55,792 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) HD Graphics 2500
2020-01-03 12:02:55,796 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.0.0
2020-01-03 12:02:55,801 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 12:02:55,813 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\selection.shader]...
2020-01-03 12:02:55,823 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\select_face.shader]...
2020-01-03 12:02:55,834 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\default.shader]...
2020-01-03 12:02:55,845 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\composite.shader]...
2020-01-03 12:02:55,862 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\overhang.shader]...
2020-01-03 12:02:55,874 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 12:02:55,889 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\transparent_object.shader]...
2020-01-03 12:02:55,901 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\striped.shader]...
2020-01-03 12:02:55,916 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [C:\Program Files\Ultimaker Cura 4.3\resources\shaders\platform.shader]...
 

Windows 10 64 bit 1809

Intel Core i3-3220

8Gb RAM

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

Looks as though I am a bit behind the curve on this since I am only an occasional user. But I offer my expereince for what it is worth. I am running using Windows 10 Pro.  I uninstalled Cura 3.6 (I think it was) the installed 4.4.1. I found that the program hung up when starting and 'Loading preferences'. I started again and uninstalled 4.4.1. I then looked for and deleted all Cura 3.6 and 4.4 files I could find on the PC other than the downloaded installation file. On re-installation the program ran successfully immediately as the .run after installation' box was ticked and I loaded a file. I created a shortcut on the desktop and tried to run again but it failed when 'Loading preferences'. I repeated the whole exercise and had the same problem again. Unfortunately I do not have the means to revert to V4.3 as some people seem to have done. Is it possible to make this available for download again, please.

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles
45 minutes ago, PaulTreble said:

Looks as though I am a bit behind the curve on this since I am only an occasional user. But I offer my expereince for what it is worth. I am running using Windows 10 Pro.  I uninstalled Cura 3.6 (I think it was) the installed 4.4.1. I found that the program hung up when starting and 'Loading preferences'. I started again and uninstalled 4.4.1. I then looked for and deleted all Cura 3.6 and 4.4 files I could find on the PC other than the downloaded installation file. On re-installation the program ran successfully immediately as the .run after installation' box was ticked and I loaded a file. I created a shortcut on the desktop and tried to run again but it failed when 'Loading preferences'. I repeated the whole exercise and had the same problem again. Unfortunately I do not have the means to revert to V4.3 as some people seem to have done. Is it possible to make this available for download again, please.

 

 

Older versions can be found on github here https://github.com/Ultimaker/Cura/tags

Note that we're not going to support anything other than the latest version (currently 4.4.1)

The 'hanging' you described is a known issue and on the backlog

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

I have just installed the latest Cura 4.4.1 application and have a question regarding the new ‚ÄúIntent‚ÄĚ Profiles. Are they only available/compatible with users of Ultimaker 3D Printers?

The reason I am asking is because they do not appear to show anywhere in the version that I have just installed. I have a Prusa i3 Mk2 printer and use it for making sample parts for

model engineering projects, which I design in Fusion 360. If they are included in this installation would you please explain how/where to access them?

Kindest Regards,

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles
4 minutes ago, Danthelad said:

I have just installed the latest Cura 4.4.1 application and have a question regarding the new ‚ÄúIntent‚ÄĚ Profiles. Are they only available/compatible with users of Ultimaker 3D Printers?

The reason I am asking is because they do not appear to show anywhere in the version that I have just installed. I have a Prusa i3 Mk2 printer and use it for making sample parts for

model engineering projects, which I design in Fusion 360. If they are included in this installation would you please explain how/where to access them?

Kindest Regards,

 

Correct. It's stated in the blog here:

https://ultimaker.com/learn/intent-profiles-ultimaker-cura-4-4

 

"Each Intent profile works with the¬†Ultimaker S5 Pro Bundle,¬†Ultimaker S5, and¬†Ultimaker S3¬†when used with our range of¬†PLA,¬†Tough PLA¬†and¬†ABS¬†materials ‚Äď as well as compatible support materials like¬†PVA¬†and¬†Breakaway."

 

Guess we should have included that in the release notes too.

 

When the right printer/material/print core combination is selected in Cura, the Intent profile will become available. 

 

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles

Thanks for that. You would think that they would inform you of this on the Download site.....

Share this post


Link to post
Share on other sites
Posted · Ultimaker Cura 4.4 released with new Intent profiles
2 hours ago, Danthelad said:

Thanks for that. You would think that they would inform you of this on the Download site.....

 

Yes it should have been made more prominent as this question has come up a few times. We'll try to put it somewhere, perhaps retroactively in the release notes.

 

It would be great to have universal Intent profiles that work on third-party machines as well, but the development effort for that would be astronomical.

 

We can always consider pull requests if people would like to make their own.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 46 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!