Jump to content

Recommended Posts

Posted · Mark 2 With Cura 4.4

I had a mishap with my hard drive so had to install Cura so decided to go for the latest, it took a few attempts for cura to slice a model for the Mark 2 I think the heads were disabled (?)  any ways I got cura to slice but when I look at the printer under preferences machine setting there is a start script for the printer and end script but when I select extruder 1 or 2 there are no scripts just material ,diameter (2.85) nozzle offset X 0.0 Y 0.0 cooling fan number,, no  nozzle sizes nothing is this correct, sorry for the vagueness but did use the UM2 much lately but now need it.. any advise welcome

Share this post


Link to post
Share on other sites
Posted · Mark 2 With Cura 4.4
12 hours ago, bob-hepple said:

when I select extruder 1 or 2 there are no scripts just material ,diameter (2.85) nozzle offset X 0.0 Y 0.0 cooling fan number,, no  nozzle sizes nothing is this correct

 

i think so...

  • extruder specific scripts are not needed (what would you expect there....?
  • and i guess (not sure) the nozzle diameter is hidden, because there are several pre-defined "variants" for each extruder (which can be selected from the drop-down list in the settings panel)

Share this post


Link to post
Share on other sites
Posted · Mark 2 With Cura 4.4

tinkergnome

thanks for the reply, I think I was thrown a little by the little information on screen,  I seem to remember possibly  nozzle diameters,  but I am probably wrong,  I know the nozzle size is in advanced and found that setting in latest cura,, as I said many times I have not used cura or my UM2 for a long time and just trying to setup now in latest software, thanks for the advise I think it wont be the last time I ask, as setting up my Mark 2 I find difficult..   

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 46 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!