Jump to content
Ultimaker Community of 3D Printing Experts

Print Core Stuck - Ultimaker 3


PancakesAreLife
 Share

Recommended Posts

Posted · Print Core Stuck - Ultimaker 3

Hello there,

 

I recently removed AA 0.4 core on my Print head slot 2 and put in a BB 0.4 core and now it won't come out.... I noticed another post where the Ultimaker Rep mentioned/showed pictures of how to pull it out correctly (vertically with a specific grip) but that didn't work...

 

Should I take it in to a local shop? Does this mean I will need to get a new print head? I purchased this second hand and its frustrating on what I thought would be pretty darn basic.

 

Also, on a side note... it looks like the print heads are not lining up horizontally. Could this be indicating an issue?

 

Thanks,

Bryan

 

 

 

IMG_1086.thumb.jpeg.d633e438516c235d898ebe40aababfc9.jpegIMG_1088.thumb.jpeg.38762df5016909f2905b705acb4a0803.jpegIMG_1085.thumb.jpeg.13d107a5ab540a965adeff07f3bacc03.jpegIMG_1087.thumb.jpeg.c1ea78f561570b70402aff0736760f2e.jpeg

  • Link to post
    Share on other sites

    Posted · Print Core Stuck - Ultimaker 3

    The upper surface of the translucent plastic part has two recesses, where the print head housing "grips" it.

    So when pressing the "release"-lever, just apply a LITTLE bit of pressure down on the translucent part and you should be able to pull the core out easily.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...