Jump to content
Ultimaker Community of 3D Printing Experts

Bowden Tube Not Comming Out of Extruder Head


Recommended Posts

Posted · Bowden Tube Not Comming Out of Extruder Head

I'm trying to remove the bowden tube from the extruder head in order to fix a clogged nozzle but the tube won't come out. I've pulled off the small horshoe shaped piece and im pushing down the piece it was attached to but it won't pull out. I'm applying quite a bit of force that im becoming concerned. Is there any thing im missing or some tip to getting it out?

  • Link to post
    Share on other sites
    Posted · Bowden Tube Not Comming Out of Extruder Head

    The material is out. I'm trying to detach the tube at the extruder. I'll have to try that. I have been able to get it out once before (through a lot of effort) but it appears like it's stuck in there, although I don't know how it could be stuck

  • Link to post
    Share on other sites
    Posted · Bowden Tube Not Comming Out of Extruder Head

    Maybe try pushing down the white ring with a suitable size hex wrench, or a ring or similar, so the load is distributed evenly on the ring? And then gently first push and then pull on the tube, and wiggle a bit? But always relatively gently. No brute force?

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...