Jump to content

L'écriture disparait quand je passe du stl au GCODE


Grouik

Recommended Posts

Posted (edited) · L'écriture disparait quand je passe du stl au GCODE

Bonjour,
J'ai une pièce que j'ai modélisé avec Freecad sur laquelle j'ai écrit un nom et une référence avec une extrusion d'un millimètre.
J'exporte ma pièce en stl, je l'importe depuis CURA où je vois bien ma  pièce et l'extrusion d'écriture, j'enregistre le GCODE.
Si j'ouvre mon GCODE avec CURA l'écriture a disparu et ma pièce s'imprime bien mais sans l'écriture. (cf fichier STL joint)
Mon écriture est peut-être trop fine ? Quels sont les prérequis pour que cela commence à être visible ?
J'ai une Ultimaker 2+.

Je vous remercie pour votre aide,

Bien cordialement,

extrusion.stl

Edited by Grouik
  • Link to post
    Share on other sites

    Posted · L'écriture disparait quand je passe du stl au GCODE

    Bonjour,
    Oui ton écriture est très fine.
    Pour voir un minimum l'écriture, il faut prendre une buse de 0.25mm (et encore c'est pas génial)
    Mais il faudrait la faire plus grosse quand même c'est préférable

    En impression SLA par contre, ça passerait niquel.

    Pour revenir sur ton fichier, je pousserai également la résolution car on voit quand même bien les arrêtes des cylindres 😉

  • Link to post
    Share on other sites

    Posted · L'écriture disparait quand je passe du stl au GCODE

    Bonjour,

    Merci pour ces éléments de réponse, je vais voir pour changer la buse, et faire une écriture plus épaisse.
    Je vais voir pour pousser la résolution, je t'avouerai que je termine une formation Freecad, nous n'avons pas du tout abordé ce sujet.
    En tout cas merci à toi,

    ++

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...