Jump to content
Ultimaker Community of 3D Printing Experts

Problem in Building CuraEngine


Recommended Posts

Posted · Problem in Building CuraEngine

Install mingw32

Run make

(In all honesty, if you need more instructions then this to get it to compile, you have little business in the code. It's a complex piece of code)

 

  • Share this post


    Link to post
    Share on other sites
    Posted · Problem in Building CuraEngine

    Hi Daid,

    I have installed mingw32-make and running make in the CuraEngine directory in the DOS prompt. I am getting the following error. Can you pls help us with set up of environment

    C:githubmhkCuraCuraEngine>mingw32-make all

    g++ -I. -c -Wall -Wextra -O3 -fomit-frame-pointer gcodeExport.cpp -o gcodeExport.o

    In file included from utils/intpoint.h:12,

    from utils/floatpoint.h:10,

    from settings.h:4,

    from gcodeExport.h:7,

    from gcodeExport.cpp:4:

    clipper/clipper.hpp:41: ostream: No such file or directory

    In file included from utils/floatpoint.h:10,

    from settings.h:4,

    from gcodeExport.h:7,

    from gcodeExport.cpp:4:

    utils/intpoint.h:15: stdint.h: No such file or directory

    In file included from settings.h:4,

    from gcodeExport.h:7,

    from gcodeExport.cpp:4:

    utils/floatpoint.h:12: stdint.h: No such file or directory

    In file included from gcodeExport.cpp:5:

    pathOrderOptimizer.h:5: stdint.h: No such file or directory

    mingw32-make: *** [gcodeExport.o] Error 1

     

  • Share this post


    Link to post
    Share on other sites
    Posted · Problem in Building CuraEngine

    It cannot find standard system header files, sure you installed all of Mingw32?

    (I'm using the one that comes with Code::Blocks)

     

    Hello~

    I have some question for same issue. compile eorror.

    cura engine source is placed in 'd:\MyWorks\......\CuraEngine-13.11.2 and Mingw32 installed to 'C:\MinGW'.

    open cmd.exe, and set path as bellow

    SET MINGW_ROOT=C:\MinGW

    SET PATH=%MINGW_ROOT%\bin;%PATH%

    SET PATH=%MINGW_ROOT%\mingw32\bin\libexec\gcc\mingw32\4.8.1;%PATH%

    run .....\CuraEngine-13.11.2\mingw23-make

    error message is

    g++ -I. -c -Wall -Wextra -O3 -fomit-frame-pointer bridge.cpp -o bridge.o

    Makefile:41: recipe for target 'bridge.o' failed

    g++: error: CreateProcess: No such file or directory

    mingw32-make: *** [bridge.o] Error 1

    how can i clear the build error?

     

  • Share this post


    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Talking additive | The 3D printing podcast
        Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
          • Like
        • 3 replies
      • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
        Save your seat for either broadcast on September 23.
        What will you learn?
        · Best practices for iterative print preparation and every lesson you should learn from each print
        · The right way to use per-object settings and when they are most useful
        · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
        · How to optimize print profile settings and whether to “keep” or “discard” changes
        · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
        · And a whole lot more tips and tricks!
         
        How can I join?
        This free masterclass will take place twice:
        1. 11am CEST (5pm SGT, 5am EDT)
        2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
          • Like
        • 0 replies
      • Do you use 3D printing at work? Let us know
        It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
        • 1 reply
    ×
    ×
    • Create New...