Jump to content
Ultimaker Community of 3D Printing Experts

Ultimaker 3 not connecting to correct IP address


Recommended Posts

Posted · Ultimaker 3 not connecting to correct IP address

We're having an issue with both our Ultimaker 3's not connecting to the correct IP addresses. Previously we had them set up and pointing to the correct addresses and we could print over the network perfectly however now the IP addresses keep changing on a daily basis on both printers and I am not sure how to get them back to the previous working addresses.

 

Any pointers or advice would be appreciated.

  • Link to post
    Share on other sites
    Posted · Ultimaker 3 not connecting to correct IP address

    This is not a question about the printer, it is a question about your network router or DHCP server which handles the IP address assignments. Most routers have the option to reserve IP addresses for specific devices, so you are able to assign a specific IP to a printer, very similar as a fixed IP address. How do to that depends on your router or network equipment.

     

    Another possibility is, to let Cura find your printers via Bonjour service. So if you don't setup your printer manually in Cura and setup a specific IP address for it in Cura, then Cura should be able to find the printer itself on your network, independent from the IP address. 

     

    The first option with the DHCP reservation is in my opinion the preferred one, because then you are on the save side, that it will always work.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...