Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up
lars86

Controller Upgrade for UMO: Looking for Insight

Recommended Posts

Posted (edited) · Controller Upgrade for UMO: Looking for Insight

Hey guys,

 

I am still rocking an original Ultimaker, heavily upgraded at this point. It is such a solid platform, mechanically, my only wants at this point could be served by a new controller / control board. 

 

Current build specs:

 

  • Official heated bed
  • Upgraded stepper motors, direct driven on X&Y, GT2 belts / pulleys
  • Custom print head with E3D V6
  • Custom extruder drive with geared stepper
  • Reprapdiscount full graphic smart controller

 

 

Here is what I want:

 

  • Quieter operation
  • More integrated fan control options
  • More accurate / smooth stepper motion
  • Network connectivity
  • More processor overhead. 8-bit is pretty lean once you start adding features.
  • Touchscreen support would be nice

 

 

Some of these items I could get with incremental upgrades (stepper drivers, Octoprint / rPi, etc). But I think buy-once-cry-once on a new controller would put me in a better place.

 

Now that Marlin 2.0 is stable and supports 32-bit controllers, that is an option. I already have it running 2.0.3 at the moment and am familiar with Marlin. That said, some of the "nice" features in Marlin just don't work well for me yet, like [linear advance 1.5]. For K values that make the K-factor test print look perfect on my bowden setup (K=1.8), normal prints don't work at all. The linear advance extruder motions are incredibly chaotic. Even during print segments that effectively have a constant print head speed, L.A. is freaking out, apparently because of the direction change between straight line segments. Not so useful.

 

Since the 32-bit controller support is still pretty sparse, taking Marlin out as a requirement opens more options.

 

The Duet 2 Wifi looks like a good option. People generally seem to like it. The configuration looks very easy, and it appears to tick all my boxes. My only concerns so far, are whether the motion control will be a step forward from Marlin, ideally providing some functional extruder advance to improve bowden flow control. Also, it's a bit unclear whether it supports the Reprapdiscount Full Graphic Smart Controller. I'd prefer to get everything up and running with that existing controller, and I don't want a web-only interface. Some posts show that they had very little interest in developing firmware support, even though the connections are present. But, some more recent posts seem to show the controller working on a Maestro.

 

If anyone has some insights on this, I would definitely appreciate it!

Edited by lars86
  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited) · Controller Upgrade for UMO: Looking for Insight

 

 

IMG_20200220_085238.jpgIMG_20200220_085316.thumb.jpg.917a0ccee60138702918d5e8a973391f.jpgIMG_20200220_085327.thumb.jpg.6c277884b4a49c2a44a3b6a156b7de94.jpgIMG_20200220_085344.thumb.jpg.e2d9352f59014cba5e12752f21150b12.jpg

Edited by lars86
  • Like 1

Share this post


Link to post
Share on other sites
Posted · Controller Upgrade for UMO: Looking for Insight

I decided to pull the trigger on the Duet Maestro. Hoping for a winner.

Share this post


Link to post
Share on other sites
Posted · Controller Upgrade for UMO: Looking for Insight

I never tried it but it's spec's are wonderfull for a 3D printer!

Unfortunatlly a little to pricy for my actual budget so I went for an bigtreetech SKR 1.3. Didn't finish installing it yet...

But I am very interested in your work, I have to UMO without heated bed (also working on a DIY HB kit) so any information on UMO modding is interesting!

Share this post


Link to post
Share on other sites
Posted · Controller Upgrade for UMO: Looking for Insight
On 2/28/2020 at 9:19 AM, Curven said:

I never tried it but it's spec's are wonderfull for a 3D printer!

Unfortunatlly a little to pricy for my actual budget so I went for an bigtreetech SKR 1.3. Didn't finish installing it yet...

But I am very interested in your work, I have to UMO without heated bed (also working on a DIY HB kit) so any information on UMO modding is interesting!

So have I :D  I got my SKR1.3, together with a 1.75mm E3Dv6, but need to finish two 3.00mm first - it should transform the printer anew.  Will also look to get 2209 drivers to quiet the printer down, I can't wait.  Please let me know how you get on - I have never attempted such an upgrade, but have built an Anet, CNC and Ender, so have a fair idea.

Share this post


Link to post
Share on other sites
Posted · Controller Upgrade for UMO: Looking for Insight

Conversion is coming along well. 

 

I am taking my time and cleaning up a lot of wiring and other modifications while I am at it. 

 

Maestro is mostly configured and already driving all axes and heating my E3D V6. Just waiting for a PT100 daughter board to be able to sense bed temp directly and eliminate the additional bed kit board.

 

Being able to thermostatically control the hot end fan and the fan cooling the stepper drivers is so nice. The printer is dead silent at idle now.

 

 

image.thumb.png.07c2681564ee38914b4fcdd1a161580a.png

Share this post


Link to post
Share on other sites
Posted · Controller Upgrade for UMO: Looking for Insight

Still a little tidying to do on my wiring, but she is a printer again!

 

I really like RepRapFirmware so far and the quick, easy configuration changes.

 

I have thermostatic fan control on my hot end fand and the mainboard cooling fan, so the printer sits silently at idle.

 

I have the BLTouch probe integrated now for mesh bed leveling. The probe works nicely on the glass bed, and helps account for blue tape for cold bed prints.

 

The Trinamic stepper drivers are amazing. Without all the R2D2 sounds, the printer make so much less noise pollution.

 

The web control is well sorted and easy to use. I haven't even bothered to hook up the old LCD "Smart" controller.

 

 

 

Z4oYbcbE1RcsF8hW1zSYYEtBETSDeKgX665z6qHF_quOSvJH6VvMZmleX1LTHIr7ZiNUF9QyVvvmz1FU3kf6VnAat4jWbSJBdqh5I5mtKbs_yd_pJQwxQgPHgebcGIFtx29cyVdIoQLDsbzaMtYup1epYQBQRNFoeT0rm4_zUGKrNjCBWPQhZef_m-oMvaNlPnyE8FJJx6j0u7_DzlYtnmtZGEq2S2lvEXGoQb8dD62vQD0u_RqbkPc2u-Pld3hypoH54AAzif77XmhHq-w14l0rTERuv42gaif0B1zIxXV_ycydbru6Vq60YuBAa1mZwYZxOYErpG8yP3lzIpxKblUDGCU0TeV-urKfaQhtw8MMKKrG76Xlu5sP7Ds7-oVv5U8anzz_h6HooGCfkddLCYsRzSYUvbOFGAxdjhqc7HBUhObXE4LFbaZyym4rFoB9HlNbDKZU4ywa2vqIsWFWq3Pqddlg9JT0vzVJw64iVaulXjDxydJ97Xq18z8Cz4-7-H4unHx-HF9Vw3cKHyPxt6BX1gpQzr9WwKvCAwvpSUOhYsSIK--S-KrpfUbXZBN0WVcZzo7VcSWXuhn0CP-MyXuiS1Edp67mteU-Lp9PL1Y2dSg23op3g6180w2KqBAkrKmKaEh_LTWga6cIHk_1GsNIXR2DyhZ381vaopwZDdGq5ipJVd-Nudo=w1462-h1297-no

 

 

4Xi-9H9TKDQyGpRi3LdcnwpFfPcwQBIffVahi5Hk1K4-gOItZUi1HCxFfJQvGDn_wqMkNiiIKouPEp5DXpCAHwkCIdBaQ7zzZO76MeEJImA2HruUc_BMxeoahiJ_y7FnK5D-HfgWsMtUNj5FKFHpH0EzvOwF2SO0M7sqPw0hKFkg2_tY10wufCpDzCo0Uw4F5DMi0AhF96-ZJOazThBsm_pCiNKefghZB0cGcNzgnMXCScluOY9n6HfMM-7CZn2Bfpy08Ev-4fEKD1VVppwyKcJeVuVmX-aZWPgfZRK-i3Yuk6LMFEvaE6-lpELp6W1LIlTYpmy77YjaTAEM95iLsQ83hXxZSWwrIa_J_v0KkTquHmhhOsn9w4tbfGUO4un-2-HnlDEs4JiajlXEMcWUJxQHcB-wmbpiBmR91RuxJbO8AqBMYmu3XF2D9g7fgR2CIH-qcujL5jRoW9QlBT8w1we9tWkpkXRXzdCqr5-Aj3pbM-gJOugu8g4QZjzHlNTcpDzGkCmCuahhi4QNNx8n0oSbgpWWMSQvctPTVxxYZmdGib7_VOI4xZDf7tPaRQRbH1vucfxv6nuqYLh23bUiwLwn9sO5A2DHKHD41grKAScpoeWwPkdSchyM8qqptOiZwUZIURrKaQTdIA9fnGCHCd8JAwJYXiGoHZ5Eg-awI7Yps87zF1-82MI=w1040-h1297-no

 

 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Talking additive | The 3D printing podcast
      Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
        • Like
      • 2 replies
    • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
      Save your seat for either broadcast on September 23.
      What will you learn?
      · Best practices for iterative print preparation and every lesson you should learn from each print
      · The right way to use per-object settings and when they are most useful
      · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
      · How to optimize print profile settings and whether to “keep” or “discard” changes
      · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
      · And a whole lot more tips and tricks!
       
      How can I join?
      This free masterclass will take place twice:
      1. 11am CEST (5pm SGT, 5am EDT)
      2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
        • Like
      • 0 replies
    • Do you use 3D printing at work? Let us know
      It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
      • 1 reply
×
×
  • Create New...