Jump to content
Ultimaker Community of 3D Printing Experts

How do I turn off this initial triangle?


Recommended Posts

Posted · How do I turn off this initial triangle?

I recently got an Ender 5+ and encountered this problem as well when i started using Cura. 

 

Below is the solution I came up with. It's not perfect but it does the job:

 

    Original GCode snippet to replace:

            G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
            G1 X10.4 Y200.0 Z0.28 F1500.0 ;Move to side a little

 

    Replacement GCode snippet:

            ; note:  - replace the Y value to something that matches your printer dimensions

            ;            - i used Y300 because my printer has a max Y of 350

            G1 X10.1 Y300.0 Z0.28 F1500.0 E15 ;Draw the first line, included only coz i changed my Y value
            G1 X10.4 Y300.0 Z0.28 F1500.0 E0 ;Bug happens here, set E0 to stop extruding while bug happens
            G1 X10.4 Y300.0 Z0.28 F1500.0 E0 ;Do prev cmd again, move works now but E0 still

            ; the code after this works normally

 

 

  • Like 1
  • Thanks 1
Link to post
Share on other sites
  • 1 month later...
  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

I have the same issue with a CR10S Pro V2.  Like others note, the issue seems to be with the call to "M420 S1 Z2".  According to here (https://marlinfw.org/docs/gcode/M420.html), this command enables

Yep, before the skirt.   I've got about 4 hours left on a print right now, but I'll try to remember to take a video when I start the next one and throw it up on Youtube sometime tomorrow if

If you make your preset printer Creality CR-10S instead of CR-10S pro it works without changing any other settings.

Posted Images

Posted · How do I turn off this initial triangle?
On 11/22/2020 at 4:50 PM, higgs_bozo said:

I recently got an Ender 5+ and encountered this problem as well when i started using Cura. 

 

Below is the solution I came up with. It's not perfect but it does the job:

 

    Original GCode snippet to replace:

            G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
            G1 X10.4 Y200.0 Z0.28 F1500.0 ;Move to side a little

 

    Replacement GCode snippet:

            ; note:  - replace the Y value to something that matches your printer dimensions

            ;            - i used Y300 because my printer has a max Y of 350

            G1 X10.1 Y300.0 Z0.28 F1500.0 E15 ;Draw the first line, included only coz i changed my Y value
            G1 X10.4 Y300.0 Z0.28 F1500.0 E0 ;Bug happens here, set E0 to stop extruding while bug happens
            G1 X10.4 Y300.0 Z0.28 F1500.0 E0 ;Do prev cmd again, move works now but E0 still

            ; the code after this works normally

 

 

First of all "Thank you Ultimaker for allowing non Ultimaker owners access to Cura"

Next thank you "higgs_bozo", I thought I was going to always wait for the V layer and pull it up, I was thinking of just changing the filament to "red" as a reference to 80's and 00's alien lizards.

 

  • Link to post
    Share on other sites
    Posted · How do I turn off this initial triangle?

    I forgot to say, I too have an Ender 5+, if I could have afforded a bigger "first printer" I would have, I am hoping to make a new radio/ac facia and more for my  Delica Spacegear which should just fit with supports.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...