Jump to content
Ultimaker Community of 3D Printing Experts

How to switch nozzles for the UM2?


Recommended Posts

Posted · How to switch nozzles for the UM2?

I have a UM2.

I really want to print with the wood filament, but it looks like I'll need a .8mm nozzle.

I have an extra nozzle to drill out. But how do I switch out the existing nozzle for the new one?

This would be handy for maintenance in general...to know how to replace this part.

 

  • Link to post
    Share on other sites
    Posted · How to switch nozzles for the UM2?

    You'll have to remove the 4 screws on the side that hold the fans. Then heat up the hotend. Finally rotate the "ring with holes" to push out the hot hotend. You can rotate this by using the screw-driver as lever.

    When inserting the new nozzle, make sure the teflon piece is pushed up, as the teflon needs to make a perfect contact area with the nozzle pipe, or else you'll get plugs.

    The nozzle and heater-block are 1 part on the UM2. The nozzle that is sold in the shop is for the UM-Original.

     

  • Link to post
    Share on other sites
    Posted · How to switch nozzles for the UM2?

    I have a UM2.

    I really want to print with the wood filament, but it looks like I'll need a .8mm nozzle.

    I have an extra nozzle to drill out. But how do I switch out the existing nozzle for the new one?

    This would be handy for maintenance in general...to know how to replace this part.

     

    Another option before replace.

    http://colorfabb.com/woodfill/6-woodfill-fine-300.html

     

    PRE-ORDER NOW! SHIPPING STARTS EARLY DECEMBER

    Wood filled filament for 3D printing

    Effective Diameter = 2.85 mm +/- 0.10 mm

    1 Spool contains approx. 750 grams of filament

    Processing temperature = 195 - 230 degrees C

    Nozzle diameter: 0.4mm

     

    also i think this must work too.

    https://www.igo3d.com/pla-abs-filament/special-filaments-3-00mm-nylon-laywood-laybrick-glow-in-the-dark-for-3d-printer/laywoo-d3-wood-filament.html

    iam so interesting in print with wood filament as well but not in change nozzle usualy.

     

  • Link to post
    Share on other sites
    Posted · How to switch nozzles for the UM2?

    Thank you, Daid!

    I'll post woody results once we've gotten through all the steps.

    @NachoKaoS

    I've tried the Laywood. It sometimes prints, and sometimes gets stuck. Not badly stuck, but it seems the wood particles are sometimes not consistent.

    A wider nozzle seems to be the way to go, plus I like how the coarse colorfabb wood looks a lot better.

     

  • Link to post
    Share on other sites
    Posted · How to switch nozzles for the UM2?

    rhyme - I don't think you followed nacho's links. There are different types of laywood and his is designed for smaller nozzles (finer wood particles).

    Are you sure you got the correct spare UM2 nozzle? Or did you get the UM1 nozzle?

     

  • Link to post
    Share on other sites
    Posted · How to switch nozzles for the UM2?

    I don't know if this helps.

    0g1IYVE.jpg

  • Link to post
    Share on other sites
    Posted · How to switch nozzles for the UM2?

    hi there

    i used to print a lot with laywood (from orbi-tech, on an U1) but stopped because i was geting more and more clogs.

    then i got a drill and made myself a 0.8 nozzle, but unfortunately it still got clogged :(

    right now i am a little bit frustrated and haven't done anymore testing, but i assume it might have something todo with print speed and temperature.

    good luck, having a 0.8 nozzle is awesome anyways, as it really speeds up bigger prints :)

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...