Jump to content
Ultimaker Community of 3D Printing Experts

How to disassemble printer to plug in new lead to print head


Recommended Posts

Posted · How to disassemble printer to plug in new lead to print head

I have an Ultimaker 2 and have to replace the wires that go to the print head. One connects inside the back and the to the thermistor that monitors the temperature and the other I believe heats the head. Both of theses wires run from inside the printer, out the back and up through a shield (fabrics wrapping like tube that all wires route through) over the top of the printer to the print head. In the past I believe There used to be videos that showed how to disassemble the back to get to the wire connectors. Can anyone tell me where I might find this type of video or instruction? I’ll continue to look as this page is different the last time I was here. Thanks in advance for any guidance! Scott

  • Link to post
    Share on other sites

    Posted · How to disassemble printer to plug in new lead to print head

    you could also search for the assembly manual exact title of the version I have is "um2 assembly manual V1.1 _english.pdf" its 14.5Mbytes so probably too big to be emailed. I searched on google and it found it on Github, also attached to this msg

     

    It is a very handy reference to have around, its helped me out on several occasions.

     

     

    um2 assembly manual V1.1 _english.pdf

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...