Jump to content

PVA/PrintcoreBB0.4/Düse/defekt?


schneider-tvd

Recommended Posts

Posted · PVA/PrintcoreBB0.4/Düse/defekt?

Hallo liebe Community,

 

ich beschäftige mich seit kurzem mit 3D-Druck auf dem Ultimaker3 Extended.

Ich würde mich sehr freuen, wenn jemand anhand der Bilder ein paar Fragen beantworten könnte.

1. Vor dem Druck werden links und rechts diese "Häufchen" gedruckt, sind das die s.g. Einzugstropfen?

2. Mit Printcore AA0.4 und (PLA) wird während der "Extrusion?" der Druckkopf hochgefahren. Das sieht irgendwie richtig aus. (1. Bild)

    Dies passiert bei BB0.4 (PVA) allerdings nicht und es bildet sich dieser Klumpen der im schlimmsten fall mit übers Druckbett gezogen wird. (Bilder 2-6)

    Ist das normal oder liegt ein Defekt vor? Muss ich eine gewisse Wartung vornehmen? Die Standarseinstellungen in Cura wurden nicht verändert.

3. Es passiert auch häufig, dass das PLA sich, bevor es die Druckebene erreicht, in der Luft "einrollt" und an der Düse kleben bleibt.

    Wie kann ich das verhindern?

 

 

PLA.png

PVA1.png

PVA2.png

PVA3.png

PVA4.png

PVA5.png

  • Link to post
    Share on other sites

    Posted · PVA/PrintcoreBB0.4/Düse/defekt?

    Ja der Drucker hat die aktuellste Firmware installiert und ich slice mit Cura 4.5.

    Auch beim normalen Druck mit PVA treten diese Haftungsprobleme auf (oder das "Einrollen" an der Düse).

    Ich hatte eher auf ein Problem der "Hardware" getippt, aber ich werde weiter testen.

    Nachdem ich hier im Forum bereits gesucht habe, hab ich, ohne Erfolg, mit verschiedenen Temperaturen und Lüfterdrehzahlen experimentiert.

    Ich versuche dann mal rauszufinden was Skirt oder Brim ist:)

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...