Jump to content
Ultimaker Community of 3D Printing Experts

S5 Has turned into a brick


Recommended Posts

Posted · S5 Has turned into a brick

I have an aborted print that just seems to be hung in the S5s' que.

When I go to manage printers the print shows as aborted. Going to the 3 dot pull down the only option I have is duplicate print job.

If I que up a new print I get "unavailable"

I have rebooted several times, firm ware update. Nothing seems to effect the brick. The aborted project lives there.

Anyone have a suggestion how to remedy this situation?

  • Link to post
    Share on other sites
    Posted · S5 Has turned into a brick

    The queue is only used when you print over wireless. If you use USB stick to transfer the print file then it won't use the queue. So, you can try to print over USB. For the queue, how about remove Cura connection in S5 and then reestablish connection.

     

    PS: I don't have UM S5, but UM3. I guess the mechanism should be the same.

  • Link to post
    Share on other sites
    Posted · S5 Has turned into a brick

    Thanks for the feedback. Yes I have already tried removing and replacing as well as the usb trick.

    Have not been able to unbrick it yet. 

    I am open to any other suggestions.

    Thanks

  • Link to post
    Share on other sites
    Posted · S5 Has turned into a brick

    Will the printer let you do a "cura connect reset"?  That's on the printer menu.  That fixes a ton of problems that have nothing to do with "cura connection".

     

  • Link to post
    Share on other sites
    Posted (edited) · S5 Has turned into a brick

    Thanks for the reply. I will give it a shot. Working remotely so I occasionally have to wait for someone in the plant to address on the factory side. I will update when I get some results.

     

    Fixed it !  Thanks for the help.

    Edited by Ritualz
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...