Jump to content
Ultimaker Community of 3D Printing Experts

Bad prints after changing PLA


Recommended Posts

Posted · Bad prints after changing PLA

Hello forum, 

 

I had just finished my first 1Kg reel of PLA that came with my AnyCubic Mega. I have replaced it with another 1Kg reel of AnyCubic PLA. However, I am having print issues. As this is my first PLA change, you can tell that I am a newbie. I can understand that two different manufactures will have different properties, but I was hoping that, by using AnyCubic PLA the settings that I had previously would work.

 

From the image attached, can anyone point me in the right direction for solving this issue. It also finds it hard to print circles, they are blobby or not complete. 

 

Thank you for your time,

Harold Clements

IMG_20200427_185046.jpg

  • Link to post
    Share on other sites

    Posted · Bad prints after changing PLA

    To me it looks like under extrusion. It might be caused by the variation in the filament diamter from one roll to the other. Check if by increasing the flow you get better prints...?

  • Link to post
    Share on other sites

    • 2 weeks later...
    Posted · Bad prints after changing PLA

    Hi, I managed to get some time over the weekend and increasing the flow seems to have improved the print by 60-70%. I will have a play about with the temperature to see if that makes much of a difference.

     

    Thanks,

    Harold

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 10 replies
    ×
    ×
    • Create New...