-
Our picks
-
Special introduction: Ultimaker Cura engine improvements with Arachne alpha
SandervG posted a topic in Ultimaker Cura,
We don't often release an alpha version of Ultimaker Cura... So what's different this time? This Alpha contains such a huge slicing engine overhaul that we really need your help!-
-
- 7 replies
Picked By
SandervG, -
-
Ultimaker Innovators list 2020
SandervG posted a topic in Official news,
We wish to celebrate and honor the innovators that push forward the field, technology and world. We opted to not present it as a competition or ranked list. Every innovator has earned his spot on that list in their own way. We also look at the 3D printing industry as a whole and not limit the list to those only using Ultimaker.-
-
- 3 replies
Picked By
SandervG, -
-
Recommended Posts
SandervG 1,405
Hello, there is a profile available for BASF PET CF in the marketplace which is also optimised for the material station. There is also a material profile for Ionic support material, however that one is not optimised for the material station. It is recommended to use materials which have a profile that is optimised for the equipment you are using. If you can't or don't want to there is a workaround where you can use an optimised profile for a similar material, but success is not guaranteed in that case. I am not sure if it would work, but have you considered using the Ultimaker PVA profile for it, since both are dissolvable support materials?
Link to post
Share on other sites