Jump to content
Ultimaker Community of 3D Printing Experts

Cura 4.6.1 leaving features out of GCode


Alister
 Share

Recommended Posts

Posted · Cura 4.6.1 leaving features out of GCode

Hi,

 

have an interesting problem with a model I'm trying to print. It's a very simple model of a console for a model boat - a rectangle feature and some oval features for gauges. Cura 4.6.1 doesn't slice the oval features into the GCode. The code when previewed is missing the these features at the layers where they should be. Installed Mesh Tools, ran the check and 2 fix options, no errors. Model generated in Fusion 360.

I had this same problem when I included the features on a larger shape that included the box of the console, and had these features on the face of the box. I separated them out too see if that would help - alas it did not.

For comparison Slic3r captures these ovals fine, but the resulting print isn't as nice.

 

Not sure if it's a settings issue or something else. Would appreciate some help.

Original STL and both Cura 4.6.1 and Slic3r gcode attached.

 

Cura 4.6.1 AppImage on Linux Mint 19.3. (which reminds me I haven't tried slicing the model in Cura 4.6.1 for Windows). 

 

TIA,

 

Alister.

20200509_SuperQual_PLA_ConsoleFace v3.gcode ConsoleFace v3.stl Slic3r_20200509_PLA_0.12mm_ConsoleFace v3.gcode

  • Link to post
    Share on other sites

    Posted · Cura 4.6.1 leaving features out of GCode

    You could turn on the "Print thin walls" setting. The cylindrical features are quite a bit thinner than the line width, so normally Cura will not put a line in their place.

  • Link to post
    Share on other sites

    Posted · Cura 4.6.1 leaving features out of GCode

    That solved the problem - thank you very much.

    Can you explain a bit further please why the problem occurred? I'm aware that there is a minimum width of line that can be printed, but thought it was related to the nozzle diameter (0.4mm in my case) and was keeping my walls (maybe that's the problem - lines vs walls) larger than that. In this case the inner and outer diameters of the cylinders were 0.5mm different which I thought would eliminate the problem.

     

    Again many thanks in advance.

     

    Alister.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...