Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · PLA end of spool

I'm finishing a spool of PLA and want to know the best way to start a new one?  Do I need to remove the filament before the end passes the feeder and dispose of the 2 feet remaining?

  • Link to post
    Share on other sites
    Posted · PLA end of spool

    Option 1: you remove the 2 feet remaining in the tube, get rid of it and out a new spool.

    Option 2: you cut a few inches out of the remaining filament so you can engage the new spool filement in the extruder. This way you waste less filament but keep in mind that retraction wil not work until only the new filament reach the nozzle.

    Option 3: you  bond the old and new filament together. If you do a search you'll find some tips on how to proceed.

  • Link to post
    Share on other sites
    Posted · PLA end of spool

    I always do remove the old end, yes. And then I use those remains for atomic pulls to clean the nozzle, so they are not wasted. But I use a more gentle atomic pull method than the official, without brutal pulling. See the manual here:

    https://www.uantwerpen.be/nl/personeel/geert-keteleer/manuals/

     

    I have tried welding new and old filaments together. Technically this works, but it is so much hassle that it is not worth the effort for me. Unless you would have a long and complex print that you don't want to restart, or you would waste way too much material. But I don't have these issues: my prints usually take ca. 2...3 hours, and 2...3 meters of filament.

     

    Maybe you could push the new filament behind the old one? But then, first you would have to cut off the deformed end of the old one. And then stay with the printer while pushing on the new filament: this may be a little hard to insert. But during the transition time when there is old and new filament in the tube, retractions won't work.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 0 replies
    ×
    ×
    • Create New...