Jump to content
Ultimaker Community of 3D Printing Experts

Does Cura 4.6 have a bug?


Recommended Posts

Posted · Does Cura 4.6 have a bug?

Just acquired a Monoprice MP10. Along with it in the micro sd was a copy of Cura 3.3 which, as far as I know, is the only one which has a profile for my new printer and it works just fine.

Having already downloaded Cura 4.6 I decided to copy over the settings from 3.3 and create a profile for the MP10. Copied everything exactly and then using 4.6 sliced a copy of Benchy as a test. The picture shows what happened about half way through the print, a big step in the model. So I then tried the same STL file in 3.3 sliced it and set it off. A perfect print! 

Just to check I also printed the tavern from Talisman in 3.3 and it also was perfect. On slicing the tavern in 4.6 it failed as the picture shows in exactly the same place and way.

I have double checked all the settings that I copied over to 4.6 and there are no mistakes or omissions so I can only assume that somewhere in 4.6 there seems to be a glitch in the code. Has anyone else come across this or something like it?

Cura 3.3 perfect.jpg

Cura 4.6 fails.jpg

  • Link to post
    Share on other sites
    Posted · Does Cura 4.6 have a bug?

    There are many settings in Cura that can not be made visible, but they can be specified in a printer definition. These include things like the maximum speeds and accelerations your printer can handle. The "Printer Settings" plugin makes these settings visible in Cura, but it is much better to push Monoprice to update their printer definitions and have them included in Ultimaker Cura.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...