Help why does my print look like this

[3dfails 0]

just top layer looks like but getting some weird marsk almost like vibration lines.  on back of head and near tail you may have to zoom in.. 

[TestingIsKey 1]

Hello 3d fails!

 

Those little dots are what the community likes to call “zits”. They are caused when the extruder “frequently starts and stops” while a print is taking place.

 

The simplest ways to fix the problem are by enabling coasting, and/or adding your retraction settings in the slicer. A good place to start with your retraction distance is 5mm. If there are still some dots, increase the distance by 0.5-1mm increments, if stringing is prevalent, go ahead by decreasing it with 0.5-1mm increments.

 

Please let me know if you have any questions!

Edited June 5, 2020 by TestingIsKey
formatting of answer

[Belezeebub 7]

Are you sure the Dog STL doesn't have fleas?  TIK is correct all kidding aside those are Zits,

[willryan3 3]

Did you have coasting on for this print?

[3dfails 0]

Thanks for help night and day difference for alot of my prints 

[TestingIsKey 1]

On 6/9/2020 at 9:42 AM, 3dfails said:

Thanks for help night and day difference for alot of my prints 

No problem! Happy to help!