Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · printer head crash to wall

As the title says: My ultimaker2 printerhead has started to crash into the frontside.


Whenever I start printing everything starts ok. The printerhead moves to the "home position" as it should and stops at the right position. But when the printer head moves to the front, for extruding filament, it doesn't stop it before the end of the rail. Instead it just keeps going and grinds on the belts. After grinding for a second it moves back and starts printing and everything is fine. It stops fine in the other direction. It's only in the back-to-front direction it doesn't stop in the correct posisition.


So I have:

  • manually tested the switches and they work.
  • resetted the printer to factory settings.
  • updated the cura to 4.6.1.
  • tightened the bets


I have had the printer for many years and never had this problem until a couple of days ago. Any ideas how to fix this? 

  • Link to post
    Share on other sites
    Posted · printer head crash to wall

    Could it be that you selected the wrong printer in Cura, or whatever slicer you used? Or its bed dimensions in Cura got corrupted?


    Or else: defective SD-card, corrupt gcode files, hairs or dust in the SD-slot causing bad contacts (try blowing it out with compressed air)? Or something else along this line...?

    • Like 1
    Link to post
    Share on other sites
    Posted · printer head crash to wall

    I solved it!


    I had set the gcode settings to "Marlin" instead of "Ultimaker 2", in cura.


    Unfortunately, the temp settings in cura can't be made with Ultimaker 2 settings. So now I have to find how to set the start up gcode in Marlin. 🤷‍♂️

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    • Create New...