Jump to content
Ultimaker Community of 3D Printing Experts

Cant connect S5 to digital factory


rmerlo
 Share

Recommended Posts

Posted · Cant connect S5 to digital factory

Anyone else having this issue?

 

I enter the PIN shown in the printer screen to digital factory and nothing happens, if I try the same pin a second time it says no printer is using that pin...

 

Cheers,

 

Rodrigo

  • Link to post
    Share on other sites

    • 4 weeks later...
    Posted · Cant connect S5 to digital factory

    I guess they have other worries right now. Yesterday was the release of the new firmware. Many have probably taken their printers out of the closet and tested them. I don't want to know how many emails they had today.

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    update: even with the new firmware update i have the same result. 

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    Apologies for the late reply, I usually don't look in the hardware forums but a colleague just made me aware of this thread. I'll move the thread to the Digital Factory section.

     

    As for the issue, please try the following things:

     

    1) If you printer has been a guest in a local group before, make sure to disconnect it from the host printer. You can do this via http://ip_of_your_printer/print_jobs. Then try the pin connection flow again.

     

    2) If that did not work, please upload the printer's logs here or in a private message to me. You can extract the logs via the display's settings menu to a USB drive.

     

    3) Lastly we have the nuclear option, which is to do a factory reset via the printer's display. This should wipe any inconsistent state that might cause the issue and allows you to start cleanly.

    • Thanks 1
    Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    I had the same issue, couldn't connect using the code on the screen. What I had to do was to Reset Digital Factory after the update and then it worked perfectly (same issue on both of our S5's).

    • Like 2
    Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    Great to hear that you were able to resolve the situation. As this is obviously not a desired situation I'll keep working with the embedded teams to make the networking more stable.

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    Yes, I lost all my statistics and analytics (actually they were already inaccessible after the upgrade but before the reset). The only real way I can count machine hours is through the nozzle data which is obviously not the best solution. Thanks for all your hard work!

    • Like 2
    Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    Improving the reporting (and moving it off the printer to Digital Factory) is pretty high on our wish list, so expect improvements in that area 🙂

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory
    20 hours ago, jkcz said:

    I had the same issue, couldn't connect using the code on the screen. What I had to do was to Reset Digital Factory after the update and then it worked perfectly (same issue on both of our S5's).

     

    the digital reset worked for me to! i` overlooked the option. Thanks!

     

    • Like 1
    Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory
    2 hours ago, jol said:

     

    the digital reset worked for me to! i` overlooked the option. Thanks!

     

     

    Great to hear that you're up and running again. For anyone still having this problem, please share some logs with us so we can investigate the root cause and fix the problem permanently.

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    You can add a hint to this information in the activation dialog?

    A kind of short info.

    --
    Problems with activation - >
        I have no code -> try this
        Factory cannot find printer -> try this
    --
    That would be great

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory
    On 7/24/2020 at 5:26 PM, UlrichC-DE said:

    You can add a hint to this information in the activation dialog?

    A kind of short info.

    --
    Problems with activation - >
        I have no code -> try this
        Factory cannot find printer -> try this
    --
    That would be great

     

    I'll relay that suggestion to the Digital Factory development team, Thanks!

    • Like 1
    Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    Necroing this thread because we're having the same problem here with our S5. I never see a PIN anywhere when trying to set up Digital Factory.

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory
    On 7/23/2020 at 10:26 AM, ctbeke said:

    For anyone still having this problem, please share some logs with us so we can investigate the root cause

     

    31 minutes ago, GLIL said:

    Necroing this thread because we're having the same problem here with our S5. I never see a PIN anywhere when trying to set up Digital Factory.

     

    Assuming that you're following the flow via https://digitalfactory.ultimaker.com/app/printers -> add printers -> S5 -> on the printer display go to settings -> network -> Digital Factory, and for some reason it doesn't work, please export the printer logs and post them here or send them to me in a private message.

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    Will do so, thanks.

  • Link to post
    Share on other sites

    Posted (edited) · Cant connect S5 to digital factory

    Okay, log files attached.

    S5Logs.zip

     

    EDIT: ...and I've reached my post limit for the day, lol

    EDIT2: And the limit has vanished! heh

    Edited by GLIL
    more
  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory
    3 hours ago, GLIL said:

     

    EDIT: ...and I've reached my post limit for the day, lol

    EDIT2: And the limit has vanished! heh

     

    New users need an approval on their first posts, after that you are free to post without moderation and without a limit.

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory
    16 hours ago, GLIL said:

    Okay, log files attached.

    S5Logs.zip 111.66 kB · 0 downloads

     

    EDIT: ...and I've reached my post limit for the day, lol

    EDIT2: And the limit has vanished! heh

    Hi,

     

    Unfortunately the main system logging file seems to not be in this ZIP file. Can you upload all the files that he printer outputs?

     

    Chris

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    Sorry about that. Was working with a USB drive that had too many files on it already and I missed selecting a bunch, lol. Here's the complete archive of everything the printer exported.

    AllUltimakerLogs.zip

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory
    1 hour ago, GLIL said:

    Sorry about that. Was working with a USB drive that had too many files on it already and I missed selecting a bunch, lol. Here's the complete archive of everything the printer exported.

    AllUltimakerLogs.zip 293.42 kB · 0 downloads

     

    Thanks.

     

    I've scanned through the logs and found the following line of interest:

     

    socket.gaierror: [Errno -3] Temporary failure in name resolution

     

    This usually indicates that for some reason, the network configuration of the printer or the LAN was not able to find the correct server that fits the api.ultimaker.com domain name. In the past we've seen that a factory reset and reboot via the printer settings menu often resolves this problem. Is there anything in your network that you would consider out of the ordinary (e.g. specific firewall rules, white/black lists of domains, etc)?

     

    Chris

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    We're behind an institutional firewall, but there shouldn't be anything unusual in there specifically regarding Ultimaker... I have the printer directly connected via Ethernet to a laptop plugged into our network, and we're able to access other Ultimaker addresses via that laptop, so I don't believe anything is being actively blocked. I can check Internet adapter settings and such on the laptop if you have anything you'd suggest I look for.

  • Link to post
    Share on other sites

    Posted · Cant connect S5 to digital factory

    Have you tried to call the API in the browser?


    For example:

    https://api.ultimaker.com/cura/v1/

     

     

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...