S5 Not displaying digital factory code

[RyanDavidson89 1]

When i press the "connect" button the the S5 LCD the button changes to the loading screen for less than half a second then changes back to "connect" without showing the code.

Weird thing is the first time i did this (when digital factory was first released) it worked and i was able to add the printer and print over cloud. 

 

Thanks

[ctbeke 111]

Hi,

 

Can you extract the printer logs to a USB drive and upload them here or share them with me privately?

 

Chris

[studiohaala 0]

Same problem here - can we please get a reply with a possible fix?

 

Thanks

[fbrc8-erin 240]

39 minutes ago, studiohaala said:

Same problem here - can we please get a reply with a possible fix?

 

Thanks

Download your log files to USB and send them to @ctbeke or upload them in this thread.

[RyanDavidson89 1]

On 7/10/2020 at 7:25 PM, ctbeke said:

Hi,

 

Can you extract the printer logs to a USB drive and upload them here or share them with me privately?

 

Chris

 

Log Files.zip

[ctbeke 111]

Hi,

 

From the logging I think that somehow the network stack on the printer got confused and started reporting an invalid IP address. Usually this is fixed by restarting the printer or resetting the local data (in the settings menu).

 

Chris

[RyanDavidson89 1]

On 7/20/2020 at 11:18 PM, ctbeke said:

Hi,

 

From the logging I think that somehow the network stack on the printer got confused and started reporting an invalid IP address. Usually this is fixed by restarting the printer or resetting the local data (in the settings menu).

 

Chris

Hi Chris,

 

Looks like the firmware update yesterday fixed it somehow.

 

Cheers

[studiohaala 0]

On 7/16/2020 at 2:00 PM, fbrc8-erin said:

Download your log files to USB and send them to @ctbeke or upload them in this thread.

 

Attached is a zip file with the logs. I updated the firmware, but I'm still not able to connect to the digital factory. code on S5 won't show. Thank you for your help :)

 

 

logfiles.zip

[ctbeke 111]

2 hours ago, studiohaala said:

 

Attached is a zip file with the logs. I updated the firmware, but I'm still not able to connect to the digital factory. code on S5 won't show. Thank you for your help 🙂

 

 

logfiles.zip 153.34 kB · 0 downloads

 

The logs contain the following line of interest:

 

ERR - stardust:144 - WebSocket error: gaierror(-2, 'Name or service not known')

 

A gaierror is thrown when a hostname is not valid during a DNS request. Is there anything in your local network that might influence DNS routing? If not, a reboot or factory reset of the printer might solve it.