Jump to content
Ultimaker Community of 3D Printing Experts

3d Terrain Display/Printing


Recommended Posts

Posted · 3d Terrain Display/Printing

Hi,

 

Please can someone tell me what i'm doing wrong!!

 

I have modeled some terrain and saved it as an STL.. when i open it in Cura to print it it says it will take 1 min and use 0.04g of filament, the model measures 100mm x 100mm x 4.6mm so it should take longer than that to print.

 

I'm probably doing something really stupid!

 

Thank you :)

  • Link to post
    Share on other sites
    Posted · 3d Terrain Display/Printing

    Hi there. 

     

    You might want to have a look at the preview part in cura and look at the layer view to see what it's actually going to print. This could be due to print setting or something wrong with your model. There is also x ray view that shows up errors in your model. 

    Are you able to share some pictures or screenshots of your model in layer view and perhaps some info on your settings. 

    Project files or stl's can also help it your able to share them.

  • Link to post
    Share on other sites
    Posted · 3d Terrain Display/Printing

    Hi Labern,

     

    Thank you for your reply.

     

    I have created a 3d model using Anyrail 6, i have saved it as an STL. and opened it in Cura, i have attached the STL file for you to see the model.

     

    I'm not sure if i may need to open the model in different software to give it dimensions?

     

    Kind regards,

     

    Jason

    t gauge.stl

  • Link to post
    Share on other sites
    Posted · 3d Terrain Display/Printing

    Hi, there's a couple of issues here, apart from the fact that the model is imported into cura with the wrong orientation, it's also not manifold...

     

    Screenshot_2020-07-28_11-46-02.thumb.png.05d9c389ea28ef905040ca371ccf02c0.png

     

    I rotated and scaled it to fit but, as you can see, the model did not slice well...

     

    Screenshot_2020-07-28_11-49-20.thumb.png.b8c05560458fc9ed40aceaf33ba9422b.png

  • Link to post
    Share on other sites
    Posted · 3d Terrain Display/Printing

    Hi Burtoogle,

     

    Please accept my apologies, i'm new to 3d printing/modeling, what does it mean when it says "Not Manifold"?

     

    Kind regards,

     

    Jason

  • Link to post
    Share on other sites
    Posted · 3d Terrain Display/Printing

    That means that the model is not "watertight", i.e. the edges of the triangles don't meet up exactly so if you poured water into the model, it would leak out of the gaps. Slicers generally require the model to be manifold/watertight. Sometimes you can have a bad model and it will slice OK but that's just luck.

  • Link to post
    Share on other sites
    Link to post
    Share on other sites
    Posted · 3d Terrain Display/Printing

    Thank you everyone for your replies,

     

    @nallath thank you i think that explains my problem! 

     

    i just need to figure out how to fix it.

     

    Kind regards,

     

    Jason

  • Link to post
    Share on other sites
    Posted · 3d Terrain Display/Printing

    Have you read the rest of the page @nallath linked to?

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Talking additive | The 3D printing podcast
        Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
          • Like
        • 3 replies
      • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
        Save your seat for either broadcast on September 23.
        What will you learn?
        · Best practices for iterative print preparation and every lesson you should learn from each print
        · The right way to use per-object settings and when they are most useful
        · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
        · How to optimize print profile settings and whether to “keep” or “discard” changes
        · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
        · And a whole lot more tips and tricks!
         
        How can I join?
        This free masterclass will take place twice:
        1. 11am CEST (5pm SGT, 5am EDT)
        2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
          • Like
        • 0 replies
      • Do you use 3D printing at work? Let us know
        It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
        • 1 reply
    ×
    ×
    • Create New...