Jump to content
Ultimaker Community of 3D Printing Experts

"No Skin in Z Gaps" Ambiguous Description


Recommended Posts

Posted · "No Skin in Z Gaps" Ambiguous Description

I was trying to figure out what "No Skin in Z Gaps" does, and came across this page.

However, the page says (Highlight mine):

 

Quote

Small gaps between the layers in the Z-direction of a model can be “fixed” by using this setting. Disabling it will ensure the layers will fuse together by printing infill between the bottom and top of the gap. If you disable this setting, it won’t fill the gap and will simply print the bottom and top as they appear in the model.

 

I presume one of them should say enable?

  • Link to post
    Share on other sites
    • 3 months later...
    Posted · "No Skin in Z Gaps" Ambiguous Description

    Hi @dshin172,

     

    Not much response with this question..

    BTW. Welcome in here.

     

    Good findings,

     

    I'll think you're right and assume the first one should be "Enable it will ensure the layers.."

     

    And this error is found here, right?

     

    https://support.ultimaker.com/hc/en-us/articles/360012512340-Shell-settings

     

    For anyone interested, roll down to; "No Skin in Z Gaps".

     

    Also, -this is a good place to learn about how Cura works with details versus settings.

     

    Thanks

    Torgeir

     

     

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...