Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up
mpd352

Making gcode changes permanent

Recommended Posts

Posted · Making gcode changes permanent

Ender 3 Pro, latest version of Cura, printing from Octoprint.

 

I've hunted for a post addressing this, without any luck. If this is a repeat, my apologies.

 

The gcode Cura is creating does not wait for the heated bed to reach temp before it starts the print job.  This means I have to manually preheat the printer hot end and bed before sending the job to the Ender 3 Pro.

 

I also have a Qidi X-One2, and use the slicer that came with it. It automatically makes the print job pause until both hot and the bed are at temp. Much more convenient than telling the printer to preheat, waiting, and then sending the job to the printer. It's not unusual that I get diverted and forget to tell the print job to start.

 

I found the gcode on this forum to modify the initial G code in the created file to make the Ender 3 Pro wait for the bed to reach temperature before it starts to print.  Is there a way in the Cura settings to make this automatic, and not have to manually modify the G code in every file I create?

Share this post


Link to post
Share on other sites
Posted · Making gcode changes permanent
10 hours ago, mpd352 said:

Is there a way in the Cura settings to make this automatic, and not have to manually modify the G code in every file I create?

 

The start script can be edited in the "machine settings" dialog (AFAIK).

Increase the dialog (window) size, if it is not visible at first glance.

Hope that helps!

 

Share this post


Link to post
Share on other sites
Posted · Making gcode changes permanent

Tinkergnome:

 

Thanks for the reply.  I have looked at this before, but I don't kn ow how I would account for the different hot end temps and build plate temps for the difference materials.  Is there a variable place holder that tells the machine to use the temps listed in the material profile to account for PLA, PETG, etc?

 

Thanks

Share this post


Link to post
Share on other sites
Posted · Making gcode changes permanent
17 hours ago, mpd352 said:

Is there a variable place holder that tells the machine to use the temps listed in the material profile

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Talking additive | The 3D printing podcast
      Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
        • Like
      • 2 replies
    • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
      Save your seat for either broadcast on September 23.
      What will you learn?
      · Best practices for iterative print preparation and every lesson you should learn from each print
      · The right way to use per-object settings and when they are most useful
      · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
      · How to optimize print profile settings and whether to “keep” or “discard” changes
      · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
      · And a whole lot more tips and tricks!
       
      How can I join?
      This free masterclass will take place twice:
      1. 11am CEST (5pm SGT, 5am EDT)
      2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
        • Like
      • 0 replies
    • Do you use 3D printing at work? Let us know
      It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
      • 1 reply
×
×
  • Create New...