Dual extruder settings!

[Boris_ 0]

 

I have build the DIY Ultimaker 2 Extended + with the dual extruder option from Creatick but I still don't have the second nozzle working, It does strange things, the offset of the two heads can't be adjusted on the display, no option in the menu but there are two heads in the menu for the other things. Does anyone have experience with this? 

 

 

Edited October 23, 2020 by Boris_
better

[macua85 52]

I'm a bit out of touch with 3D printing, however things still appear to be the same in Cura. If you do use Cura, you can set the print nozzle off sets under Setting -> Printer -> Manage Printer -> Machine Settings -> Extruder (1 or 2)

 

The offsets are located in there. Obviously printer needs to be connected with USB for this.

 

Hope it helps, sorry if it doesn't.

 

Thanks,

Anthony