Jump to content
Ultimaker Community of 3D Printing Experts

Can anyone tell why there is a pause in this G code?


bigone5500
 Share

Recommended Posts

Posted (edited) · Can anyone tell why there is a pause in this G code?

... please share the project-file with us: File - Save Project...

 

Then we not only have the object but also your printer settings...

 

Did you not accidentally set a option/command under Extensions - Post Processing - Modify Gcode

 

_post_processing_cura.png.aa0ff82ea15bf4c2ab56ef0dfa93dd10.png

Edited by Mari
  • Link to post
    Share on other sites

    Posted · Can anyone tell why there is a pause in this G code?

    So I started printing the right hand side arm. I sat patiently and waited to see when the pause would happen. It actually happened twice. At approx 39m30s in, it paused and I quickly pressed the knob and it continued. It completed another pass and stopped again. This is when the message went away on the display. I will attach a photo of the location that it pauses. You will see the point at which there is a small curly Q. 20201108_183243.thumb.jpg.8106ba15c8ddd144e46f02820cf89c6b.jpg

  • Link to post
    Share on other sites

    Posted (edited) · Can anyone tell why there is a pause in this G code?
    6 hours ago, bigone5500 said:

    Would printing over USB have any effect on this?

     

    That is probably the problem... put the gcode-file on mirco sd-card and print with that! Cura isn't really designed for printing over USB...

    Edited by Mari
  • Link to post
    Share on other sites

    Posted (edited) · Can anyone tell why there is a pause in this G code?

    I will use SD cards from here on out and see if the issue persists. Thanks! 

    Edited by bigone5500
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...