Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · S5 Air Manager opinions

Hi All,


I am considering an Air Manager for my S5 for the potential health benefits whilst being in the same room as the printer etc, but also the more stable build area temperatures.


However i am keen to hear how people find it performs for basic tasks such as printing very find detail in PLA, with other printers which are fully enclosed often it is advised to leave the doors open when printing PLA. How well can the system lower the build volume temps when the doors are closed ?, how noisy is the fan when printing PLA or PETG for example ?. Is printer overall quieter or louder than with the air manager removed (assuming the print head fans are not heard with the air manager in place but the main extractor fan is heard instead).


Do you find you can access everything you need through the doors or do you need to keep lifting the hood ?, from what i can tell the hood is hinged at the back, which for me is a pain as it would hit the wall when opening.



  • Link to post
    Share on other sites
    Posted · S5 Air Manager opinions

    Hi Link, thank you for your post! I think it is good if other users would share their opinions and experiences from using an Air Manager, but some questions I think I can also answer based on how it performs. 


    Besides UFPs it also removes (excessive) hot air from the build volume, so printing fine details shouldn't be negatively impacted. A running Air Manager is probably louder than the sound your fans generate on your print head if it runs on full capacity. It is hinged on the back so you do need some free space behind your machine. The hinges are not too lose, I have like 10cm behind my Pro Bundle, and even though it doesn't open entirely, it stays open when I lift the Air Manager up. 


    Hope this helps! 

  • Link to post
    Share on other sites
    Posted · S5 Air Manager opinions

    The Air Manager is great for that purpose. When I print ABS for example which smells normally not very good during printing, I can now smell nothing in the room with the Air Manager. So the filter is doing a great job.


    When you print PLA you don't want to have too much heat inside the printer. Therefore the fan is working at 100% and you can keep the doors closed. I haven't had any problems with it yet and I print a lot of PLA too.


    But the Air Manager is not silent and when running at full speed it is loud. Not a disturbing sound, so I can still sit in the same room, but it is louder than without an Air Manager. So when you want to reduce the sound during printing, forget it, that's not the case and it's generally not possible in my opinion. You cannot just enclose the printer you need a powerful fan to move the warm air out of the enclosure.


    I have my Air Manager now for some time and haven't opened it once in that time. So there is basically no need to open it to reach the important parts inside. But if you really need to come from the top, then you can just open it, there are hinges on the back, so this is no problem.


    A big advantage is also that it reduces warping or bad layer adhesion nearly to zero, because with a covered top and front there is no chance for a cold airflow which could destroy your print. Not needed for PLA, but if you print something else it is important.

  • Link to post
    Share on other sites
    Posted · S5 Air Manager opinions

    thanks Both, good to hear your experiences. I tend not to do long prints if i will be in the room all day anyway, so need to weigh up the pros and cons of getting it. Also i don't tend to have any warping issues, a bit of 3Dlac on the bed and its good to go, however i do not print ABS, maybe with the air manager i could give that a try !

  • Link to post
    Share on other sites
    Posted · S5 Air Manager opinions

    wow, i just checked the pricing here in the UK and its selling for £822 ($1084) !!,


    i am a huge UM fan but that seems a large amount for just the air manager !, has it gone up in price ?, i thought it was around £400 ?. I can't quite get my head around how it can be that price ?.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • 20 Visiting our virtual showroom

      1. 1. Have you visited our virtual showroom before?

        • Yes
        • No
      2. 2. If yes - what content did you find most interesting?

        • Information about Ultimaker ecosystem
        • Applications & application stories
        • Customer success stories
        • Webinar sessions
        • Material wall & ecosystem partners
        • New product introduction; software subscription plans
      3. 3. What of the below would make you consider visiting (again)?

        • New Live Ultimaker Webinar streams
        • ‘Ask Me Anything’ with industry experts or Ultimaker staff via main stage and public chat
        • New customer success stories
        • New applications
        • Presentations/news from ecosystem partners
        • Opportunity to meet representatives for an interactive tour
        • Helpful videos like Software tutorials
        • Other; leave input in a comment below!

    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    • Create New...