Jump to content
Ultimaker Community of 3D Printing Experts

Print head chrashes into corner


ACCSisko
 Share

Recommended Posts

Posted (edited) · Print head chrashes into corner

Since this week i have a curious problem with my Ultimaker 2+...

When i finish a print, let it cool down and print a new file again, the print head chrashes into the left back corner and does not stop until i flip the switch.

I had this problem right now again, it looks like the endstops do not send a signal to the board, but they are all okay and work when a print is finished.

I use Tinkergnome 17.10.1 since a month now and everything works great, till that happens after the cooldown phase and starting a new print without restarting the printer.

After i restart the printer, everything is working again as it should.

I have some other problems too, but they were mostly solved and have nothing to do with this.

I have the printer about two years now and maintance is done regulary each month, but the most problems started early summer this year or better said, since the waranty is over.

It also got a Bondtech DDG extruder a while ago and some other stuff.

 

Could it be a bug in the TG firmware? I do not want to change it, i like the system and the infos it puts out very much.

 

EDIT: Problem solved, it is a bug in the firmware, can be closed!

Edited by ACCSisko
UPDATE
  • Link to post
    Share on other sites

    Posted · Print head chrashes into corner
    5 hours ago, ACCSisko said:

    Problem solved, it is a bug in the firmware, can be closed!

    Can you elaborate it a bit more? I also use 17.10.1 but haven't seen the bug yet. 

  • Link to post
    Share on other sites

    Posted · Print head chrashes into corner
    2 minutes ago, Smithy said:

    Can you elaborate it a bit more? I also use 17.10.1 but haven't seen the bug yet. 

    Sure 🙂

     

    After a print ends, you let everything cool down and then start a new print, it can happen (it musn't) that the system doesn't register the endstop switches and drives the printhead into the corner till you abort the print or cut off the power.

     

    The reason of this could be the geek mode, disabling it can provide less stress on the system, as i read it.

     

    I powercycle the machine now after each print, i don't want to change the belts tjat early.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 8 replies
    ×
    ×
    • Create New...