Jump to content
Ultimaker Community of 3D Printing Experts

Bedtempatz


simon
 Share

Recommended Posts

Posted · Bedtempatz

The bed temperature is normally set in the UM2 material setup controls.

On the Plugin page there's a note that says.

To use with Cura 13.11.2, add the middle line in between the two others:

changeState = 0

currentSectionType = 'STARTOFFILE' (add this line)

with open(filename, "w") as f:

And change the following line:

if getValue(line, 'G', None) == 1:

To:

if getValue(line, 'G', None) == 1 or getValue(line, 'G', None) == 0:

I've looked at the gCode and can't see any of these instructions in the code that Cura has written. Presumably this is written for the UM1 or other printer. Does that mean it won't work with the UM2.

If someone can quickly answer this it will save me some head scratching and plastic.

Thanks in advance.

 

  • Link to post
    Share on other sites

    The plugin is a ".py" or python file. The changes above refer to the python code. I don't know why someone doesn't just change the code and check in the latest version.

    History:

    With older versions of Cura (13.04 and older) all moves were G1 commands. Now some moves are G1 and some are G0. For example G0 Z23.4 says to move the z axis only to 23.4mm off the bed. So the change to the python code now recognizes the new G0 commands.

    Consider also trying tweakAtZ which can do much more:

    https://github.com/Dim3nsioneer/Cura-Plugins/raw/master/TweakAtZ.3.0.1.py

     

     

  • Link to post
    Share on other sites

    Posted · Bedtempatz

    Great, thanks I'll give that a go tomorrow

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...