Jump to content

Layers or supports missing (sometimes and in random places)


Tetelot

Recommended Posts

Posted (edited) · Layers or supports missing (sometimes and in random places)

Hi! First of all, excuse me by my bad english.


I'm a Cura user since 2018, and for about 6-8 months I saw this kind of bug in Cura.
The STL is fine, it doesn't have errors, but sometimes a layer is missing and it appears on the floor. If you move the model a little it fixes.

The same happens with the supports. It's like there is an imaginary grid on the floor so you have to move the model to fit in the grid.

It doesn't bother so much because I always watch the Layer view, but sometimes I'm in a rush and find the Printer doing supports mid air and it's a problem.

Thank you very much!
Esteban.

 

Edit: I'm not using the 4.8 because it changes the orientation of the models when arranging and I use the Seam in a XY coordinate. So I don't know if it is fixed.

1.png

2.png

3.png

4.jpg

5.jpg

Edited by Tetelot
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...