Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

I have actually printed on a 2mm nozzle. It won't work on a regular nozzle as the core of the filament wont really melt and you will have to print very slow. I use the 3d Solex matchless nozzles and its more possible to print 2mm. The matchless nozzles increase the surface area of the nozzle and allow the filament to melt more thoroughly. It requires experimenting with the settings though.

  • Link to post
    Share on other sites

    Ultimaker S line printers are rated for a max build speed of 24 mm³/s maximum.

    So if you use a 2 mm nozzle with lets say 0.5 mm layers you could print at max 24 mm/s (Nozzle diameter * layer hight * print speed). 

    0.8 mm is allready really big for FDM, did you allready try it? In that case, with 0.4mm layers you could go up to 75 mm/s.

     

    Keep in mind these values are theory, I would allways take them with care and take some margin.

     

    If you really want to push more matérial you would have ton consider changing the extruder and the heater block (Wich is, as far as I know, not possible any more on actual manufactured UM printers)

  • Link to post
    Share on other sites
    Posted · 2mm Nozzle

    Well, if I print 0,12mm layers at 2mm width assuming 24mm³/s max I can go 100mm/s printspeed.
    But I have no intensions of such speed. Half, max, is fine for me. So that means I will have plenty of margin with a 2mm nozzle :)

  • Link to post
    Share on other sites
    Posted · 2mm Nozzle

    I think I will drill one of the nozzles I have and give it a try :) 

    Will make for sturdy vases in vase mode :D

  • Link to post
    Share on other sites

    Yeah, I feel like its only really useful if ur just getting a basic idea for a design or if you want vases with a cool design.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...