Jump to content
Ultimaker Community of 3D Printing Experts

Help with CURA Problem!


Recommended Posts

Posted · Help with CURA Problem!

It would be nice to see a screen shot.  

1) What Cad software did you use?

2) Is it manifold?  Are there surfaces on the outside and also on the inside spaced at least 1mm apart?

 

It's probably the normals which specify which is inside and which is outside of every surface.  There are 3 different ways to fix this depending on which CAD you used.

 

Alternatively you can try this:

In the upper right corner of Cura click "marketplace" and make sure you are on the "plugins" tab and install "Mesh Tools".  Then restart Cura.  Now right click on your model, choose "mesh tools" and first choose
"check mesh", then "fix model normals"

  • Link to post
    Share on other sites
    Posted · Help with CURA Problem!

    This model cannot be fixed in its current 'object' structure. Hopefully I can explain this, so bear with me.

     

    I opened the model in my 3DSMAX and ran an 'STL Check'. This is a very simple toll that can analyze the structure for many defects. This is what I found upon just starting the process:

    OpenEdges.thumb.jpg.a39b09103747626ac3542c6d61ef2f2f.jpg

    Turquoise boxes show the errors. The blue arrow shows the top part that cannot connect to the cylindrical object. This is because the inner cylinder is a manifold object itself.

     

    As you can see here, the box is proper walls with a single edge that Cura is capping trying to make it a manifold object. The obliterates the interior cylinder. The blue arrow points to the void and the purple arrow shows the separate manifold object.

    DoubleWallSeparateObject.thumb.jpg.87788653364b419a03336bd4fba93b88.jpg

     

     

    The slightly shaded area is the manifold 'double wall' floating inside the box area.

    doublewallShaded.thumb.jpg.e8aca133fc81e1972b2a5eb566b9df25.jpg

     

    I made a very quick model that shows how it should have been done.

    I started with a box. Then made a separate chamfered cylinder and subtracted that from the box. I came out with single walls that are manifold across the entire structure. Contrasting the original model with the double walled cylinder.  This has a single wall that caps all positive surfaces and leaves the negative void to do its job (whatever that design feature is for)

    CleanTop.thumb.jpg.18fa167f93a44a415d0324433c7d8d7e.jpg

     

    Here I removed the top part of the box to show the contrast between the original model and the proper model.

    SingleWallTop.thumb.jpg.704459d38ef323af5aef2ac94a229b69.jpg

    The red edges are the open surfaces that can connect from a single wall to another single wall. The original model had a separate manifold object inside the non-manifold box.

     

    This shows what the same area of close up from the side looks like in a proper set of walls: it is not a double wall....

    SingleWall.thumb.jpg.f402ba531a29056340ed3a989b39261d.jpg

     

    So, the upshot is that the original model cannot be printed or fixed in its current shape. I do not know what package you used, but I cannot imagine any program that will not allow you to subtract one object (say the cylinder) from another (in this case the box). These are simple boolean operations that allow for this specific type of construction.

     

    Feel free to ding me if I have not made anything clear. I can follow it, but that is not saying much 😆 I will be happy to try and confuse you some more 🙂 

    • Like 3
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 0 replies
    ×
    ×
    • Create New...