Jump to content
Ultimaker Community of 3D Printing Experts

Part 1 - Additive Manufacturing - Guitar Pickups


Recommended Posts

Posted (edited) · Part 1 - Additive Manufacturing - Guitar Pickups

We have been beginning our work creating American Made components, Its been a journey.  We are just getting started.  After PLA and ABS printing and looking for ways to get the best surfaces, I thought I would share some of it.

 

https://imgur.com/z6X9wpk

 

Matte Black looks great but the surface will require too much post-processing.  Copper wire goes around the bobbin but the top surface obviously looks not great.  After changing some settings and working with ABS, its maybe a bit soft or not resonant enough so we tried annealing it.  Bad Idea!  PLA anneals well but it is pretty strong from the get go.

 

Black Tough PLA lead me to the Transparent PLA which won.

 

imgur.com/a/YI3YhFg

 

You can immediately tell by hearing the resonant properties what material is what.

 

http://imgur.com/a/JUaB1Xz

 

It has to have virtually no post processing, so we settled on 45 degree angle prints so the surface is all the same.  Its worth noting that even after the S5 cleared the material out of the nozzle, it still printed the first part of the Transparent PLA with black ABS material, probably from the print head itself.

 

http://imgur.com/a/jm960hy

 

Annealing PLA causes some distortions that aren't acceptable with this application, so later today I am going to print a few completely walled off with PVA 100% support, 100% infill and toss it in the oven to see if it distorts.  I hope not, because if it distorts in the process of creating the product, its going to be a problem..

 

I wound it up, got it ready to be used.  Looks great for a first draft;

http://imgur.com/a/NIS2Cim

 

What do you think?

Edited by JerichoGuitars
can't use block code I guess
  • Link to post
    Share on other sites
    Posted · Part 1 - Additive Manufacturing - Guitar Pickups

    Hi @JerichoGuitars, thank you for your post! It sounds very interesting, but unfortunately it looks like the images you tried to attach are not visible, but a broken link. Could you perhaps have a look at this, and if possible add the images again? Thanks!

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...