Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Wraping material

Hi guys!
I ran into a problem that I didn't have when printing smaller elements.
The initial layer peels off the bed when printing with the default settings for PLA och nozzle 0,4mm.
Currently, I print from the beginning, I changed the initial base temeperature from 60C to 65C.
Hope it will help. If not... which from advices I should follow? 
I feel a bit confused, since there are many different.

Ah and I use glue stick!
 

1 (2).jpg

2.PNG

  • Link to post
    Share on other sites
    Posted · Wraping material

    60°C is enough for PLA, don't go higher.

    I would say you have to level your bed closer to the nozzle. Do the leveling process again, but adjust the screws a little bit more to feel more friction on the leveling card.

    • Like 1
    Link to post
    Share on other sites
    Posted · Wraping material

    Since I was printing via digital factory and somebody else was preparing bed before printing I didn't have possibility to check anything. I came to the office today and the problem is solved. It was problem with plastic ring (this that is on cables - picture) that was crashing with ventilator case. I just moved it a bit and now I don't have any problem with printing.

     

    5.jpg

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...