Jump to content
Ultimaker Community of 3D Printing Experts

Material station humidity control problem


Recommended Posts

Posted · Material station humidity control problem

Hi people!

We recenttly bought an S5 Pro Bundel and we are facing seriuos problems.

I am in a city that the humidity usually reaches 85% on the summer ( south Brazil ).

The printer is installed in a room with air conditioning ( 65% humidity in the room)

The Material station (MS) is never turned off, and I only use original Ultimaker materials.

I only open the MS when some spool finish, and is very quickly.

My PVA, Nylon, TPU printing are horrible, I need to keep dry in an external device and keep on MS when printing.

I'm dealing with my local supplier since 16/december.

Do you guys have this problem too? What procedures can I do?

 

 

Room 65%.jpg

MS 58%.jpg

  • Link to post
    Share on other sites
    • 2 weeks later...
    Posted · Material station humidity control problem

    Hi I had the same problem after 2 months of using the Pro Bundle. After contacting my dealer, Ultimaker offered me an exchange of the dehumidification module which solved my problem. (60% inside before, 20% after). Contact your dealer and keep us informed.

  • Link to post
    Share on other sites
    • 1 month later...
    Posted · Material station humidity control problem

    Ultimaker offered to my dealer to change the module, but not for free.

    As it´'s expensive to buy this every 4/2 months, we are looking for a DIY solution.

    Please @Silfried tell me if the change of the module is ok until now and how many time is working after this repair. 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 5 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...