Jump to content
Ultimaker Community of 3D Printing Experts

Sell 1,5 year old ultimaker1 with a lot of filament and upgrades - SOLD

Recommended Posts

I am selling an assembled Ultimaker for VB 1199€ (without shipping). I bought it in April 2012. The first print was done in may. I printed a lot of stuff from thingiverse and some own designed stuff. After some trouble at the beginning I learned a lot (Thanks to the community) and get it running so it now runs smootly. I printed some parts for adjusting z axis and to tightening the belts as well. Some month ago a builded a heathed bed as well.

My offer contains the following:

1x fully assembled Ultimaker

1x UltiController + 2GB sdcard

1x PLA filament Green

1x PLA filament Grey

1x PLA filament Black

1x PLA filament White

1x PLA filament Transparent

1x ABS filament Red

1x Blue tape 3M Scotch

1x Capton Tape

1x PowerSupply for Heated bed

I made the following upgrades

1 x Ulticontroller Kit

1 x Extruder Ugrade Kit V2

1 x Knureled bolt upgrade

1 x Heated Bed

Please have look at the following pictures.







I live in Germany nearby Stuttgart. If you like you can take it from there I will also send it through Europe.



Share this post

Link to post
Share on other sites



Verkauf 5 Reel ABS oder PLA sofort für 3D, neu und mit allen 3D-Drucker, die derzeit auf dem Markt (Durchmesser 1,75 mm) Drucker kompatibel.


Beschreibende Detail Spulen:

- 1 Spule ABS - 1 kg Weiß

- 1 Spule ABS - 1 kg blau.

- 1 Spule PLA - 1 kg rote Farbe.

- 1 Spule PLA - 1 kg blau.

- 1 Spule PLA / PHA - 750 Gramm von Magenta.


Nämlich für PLA und ABS-Spulen (der Preis einer Spule 30,00 € / Zimmer).


1 Rolle Kapton Stärke 8 33 Meter lang verstärkt durch 50 mm breit Zoll: der Preis von der Spule 30 Euro.


1 SCREEN letzt-Controller Marke "VIKI" neun Farb BLACK 3D-Drucker zu einem Preis von 65,00 €.


Es ist bekannt, dass die Versandkosten liegen in der Verantwortung des Kunden.



Share this post

Link to post
Share on other sites

Hi Stefan,

Ich würde den Ultimaker gerne behalten weil er echt gut läuft, aber ich habe aufgrund von familären Veränderungen überhaupt keine Zeit mehr dafür. Und ihn nur rumstehen lassen wäre schade. Ich habe den Preis in dem Ursprungsthread immer angepasst deswegen sieht du glaube ich die Änderung nicht.




Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • How to 3D print with reinforced engineering materials
      Ultimaker is hosting a webinar where we explain how you can achieve and maintain a high print success rate using these new reinforced engineering materials. Learn from Ultimaker's Product Manager of Materials and top chemical engineer Bart van As how you can take your 3D printing to that next level.
      • 2 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!