Jump to content
Ultimaker Community of 3D Printing Experts

How to sink project into bed?


TCBeard
 Share

Recommended Posts

Posted · How to sink project into bed?

Hi, so what I am trying to do is take a black and white line art image, either jpg or bmp, and print in 3D. It is a black line on a white background. I am able to get a nice print with the black at the height I want, but I am getting a one layer base across the entire design. For example I'm getting a one layer square with the 1/2" tall circle that I want. I need to eliminate that one layer square. How can I tell Cura not to print that first layer square or how can I sink the project slightly to cut off that layer? I am using Cura 4.8
Thanks in advance for your advice and help!

  • Link to post
    Share on other sites

    Posted · How to sink project into bed?

    Go to "Preferences" and open "Configure Cura" and uncheck "Automatically drop models to the buildplate." Then you will be able to move the object below the buildplate. Just remember to compensate for the amount lowered.

  • Link to post
    Share on other sites

    Posted · How to sink project into bed?

    Sink it into the buildplate is even possible with the "drop to buildplate" option enabled. You should disable that option if you want an object "hovering" over the plate, i.e. creating a vertical space that will be filled with support structure. When you "unsink" the object, the "drop to buildplate" comes in handy again.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...